Arandes, J.M., De-Lasa, H.I. 1992. Simulation and Multiplicity of Steady States in FCCUs. Chem.Eng.Sci., 47, 2535-2540.
Bernard, J. A. 1988. "Use of Rule Based System for Process Control ",IEEE Control System Magazine, Vol. 8, No.5, pp. 3-13.
Bozicevic, J., Lukect, D. 1987. Dynamic Mathematical Model of The Fluid Catalytic Cracking Process, Trans. Inst. Meas. Control (London), 9(1), 8-12.
De-Lasa, H.I., Errazu, A., Barreiro, E., Solioz, S. 1981. Analysis of Fluidized Bed Catalytic Cracking Regenerator Models in An industrial Scale Unit, Can
J. Chem. Eng., 59, 549-553.
Elnashaie, S.S.E.H., El-Hennawi, I. M. 1979. Multiplicity of The Steady-State in Fluidized Bed Reactors-IV. Fluid Catalytic Cracking (FCC), Chem.Eng. Sci., 34, 1113-1121.
Elshishini, S. S, Elnashaie, S.S.E.H. 1990. Digital
Simulation of Industrial Fluid Catalytic Cracking Units: Bifurcation and ıts Implications, Chem. Eng.
Sci, 45 (2), 553-559.
Elnashaie, S.S.E.H., Elshishini, S. S. 1993. Digital
Simulation of Industrial Fluid Catalytic Cracking Units-IV. Dynamics Behaviour, Chem.Eng.Sci., 48 (3), 567-583.
Emami, M.R., Türkşen, İ.B. and Goldenberg, A.A. 1996a. "An Improved Fuzzy Modeling Algorithm, Part I: Inference Mechanism", NAFIPS'96, June 20-21, U.S.A.
Emami, M.R., Türkşen, İ.B., Goldenberg, A.A. 1996b. "An Improved Fuzzy Modeling Algorithm, Part II:Inference Mechanism", NAFIPS'96, june 20¬21, USA.
Errazu, A.F., De-Lasa, H. I., Sarti, F.A. 1979. Fluidized Bed Catalytic Cracking Regenerator
Model. Grid Effects, Can. J. Chem. Eng., 57, 191-197.
Farag, H., Ng, S., De-Lasa, H. 1993. Kinetic
Modeling of Catalytic Cracking of Gas Oils Using in traps (FCCT) To Prevent Metal Contaminant
Effects, Ind. Eng. Chem. Res., 32, 1071-1080.
Felipe, L.I., Richard, R.M. 1991. "Dynamic Modeling of a Fluid Catalytic Cracking Unit",
Presented at the AIChE Annual Meeting, Los Angeles CA.
Ford, W. D., Reineman, R.C, Vasalos, I.A., Fahrig, R.J. 1976. "Modeling Catalytic Cracking Regenerators", Presented at the NPRA Annual Meeting, San Antonio, TX, Paper AM7629.
Guigon, P., Large, J. F. 1984. Application of the Kunii-Levenspiel Model to a Multistage Baffled Catalytic Cracking Regenerator, Chem.Eng. J., 28,
131-138.
Iscol, L. 1970. "The Dynamıcs and Stability of A Fluthid Catalytic Cracker", Presented at the ASME
11th Joint Automatic Control Conference American Automatic Control Council, Atlanta, GA, Paper
23-B.
Jacob, S.M., Gross, B., Voltz, S.E, Weekman, V.M.
1976. A Lumping and Reaction Scheme for
Catalytic Cracking. AIChE J. 22 (4), 701-713.
Krihna, A.S., Parkin, E.S. 1985. Modeling the Regenerator in Commercial Fluid Catalytic Cracking Units, Chem.eng.Prog, 81 (4), 57-62.
Kurihara, H. 1967. "Optimal Control of Fluid Catalytic Cracking Processes", Ph.D.Thesis, M.I.T, Cambridge Mass.
Larocca, M., Ng, S, De-Lasa, H. 1990. Fast
Catalytic Cracking of Heavy Gas Oils. Modeling Coke Deactivation", Ind. Eng. Chem. Res, 29,
171-180.
Lee, E., Groves, F.R, Jr. 1985. Mathematical Model of The Fluidized Bed Catalytic Cracking Plant, Trans Soc. Comput. Simulation, 2, 219-236.
Lee, L, Yu, S., Cheng, C. 1989a. Fluidized-Bed
Catalyst Cracking Regenerator Modeling and Analysis, Chem. Eng. J., 40, 71-82.
Lee, L., Chen, Y., Huang, T., Pan, W. 1989b. Four-
Lump Kinetic Model for Fluid Catalytic Cracking Process, Can.J.Chem.Eng., 67, 615.
Lee, W., Kugelman, A.M. 1973. Number of Steady State Operating Points and Local stability of Open Loop Fluid Catalytic Cracker, Ind. Eng. Chem.Process Des. Dev., 12 (2),197-204.
Luyben, W.L, Lamb, D. E. 1963. "Feedforward Control of A Fluidized Catalytic Reactor-Regenerator System", Chem.Eng.Prog.Symp.,
46(59), 165-171.
Mühendislik
Bilimler
i Dergisi 2004 10 (1) 101-110
109
Journal of Engineering Sciences 2004 10 (1) 101-110
Bir Petrol Rafinerisi (Tüpraş) Akişkan Yatakli Katalitik Parçalama Ünitesinin (Fccu) BulanikModelleme Uygulamasi, M. Zeydan
Mcfarlane, R.C., Reineman, R.C, Bartee, J.F., Georgakis, C. 1993. Dynamic Simulation for Model VI Fluid Catalytic Cracking Unit, Comput.Chem.Eng., 17 (3), 275.
Mcgreavy, C., Isles-Smith, P.C. 1986 Modeling of A Fluid Catalytic Cracker", Trans.Inst.Meas.Control
(London), 8 (3),130-136
Paraskos, J.A., Shah, Y. T., Mckinney, J. D.,Carr, N.
L.
1976
. A Kinematic Model for Catalytic Cracking in a Transfer Line Reactor. Ind. Eng. Chem. Process, Des. Dev., 15 (1), 165-169.
Reichle, A. D. 1992. A Half Century of Fluid
Catalytic Cracking, OIL&GAS Journal
Seko, H., Tone, S., Otake, T., 1978. Operation and Control of A Fluid Catalytic Cracker". J.Chem.EngJpn., 11 (2), 130-135.
Shah, Y.T, Huling, G.T, Paraskos, J.A, Mckinney, J. D. 1977. A Kinematic Model for An Adiabatic Transfer Line Catalytic Cracking Reactor, Ind. Eng. Chem. Process Des. Dev., 16 (1), 89-94
Shnaider, G. S., Shnaider, A.G. 1990. Kinetic Models of Catalytic Cracking of Oil Fractions in Single-Stage and Multi-Stage Reactors With
Fluidized Beds and Interpretation of Experimental Data of Catalytic Cracking Performed in These Reactors, Chem. Eng. J., 44, 53-72.
Takatsuka, T., Sato, S, Morimoto, T., Hashimoto, H. 1987. A Reaction Model for Fluidized-Bed Catalytic
Cracking of Residual Oil, Int. Chem.Eng. 27, 107¬116.
Venuto, P. B. and Habib, E. T. 1979. Fluid Catalytic Cracking With Zeolite Catalyst, Marcel Dekker Inc., N.Y.
Weakman, V. W., Nace, D. M. 1970. Kinetics of Catalytic Cracking Selectivity in Fixed, Moving, and Fluid Bed Reactors, AIChE J., 16, 397-404
Zeydan, M. 1999. "Bir Petrol Rafineri Ünitesinde
(FCCU) Bulanık Modelleme ve Kontrol", Yayımlanmamış doktora tezi, Sakarya Üniversitesi Fen Bilimleri Enstitüsü, Sakarya.
Zhaou, X., Lu, Y. 1988. "Non-Linear Dynamic Model and Parameter Estimation for Fluidized
Catalytic Cracking Unit", IFAC Proc., 2, 1079-1083.
Zheng, Y. 1994. Dynamic Modeling and Simulation of A Catalytic Cracking Unit, Comput. Chem. Eng., 18 (1), 39-44.
Thank you for copying data from http://www.arastirmax.com
