Buradasınız

Anasayfa » Content

ORTA NOKTASINDAN P YÜKÜNE MARUZ HER İKİ TARAFINDAN DESTEKLENMİŞ METAL MATRİKSLİ KOMPOZİT BİR KİRİŞ İÇİN ELASTİK GERİLME ANALİZİ

AN ELASTIC STRESS ANALYSIS FOR A METAL MATRIX COMPOSITE BEAM OF ARBITRARY ORIENTATION SUPPORTED FROM TWO ENDS ACTED UPON WITH A FORCE AT THE MID POINT

Journal Name:

  • Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi

Publication Year:

  • 2004

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
In this study, an elastic stress analysis is presented for a metal matrix composite beam of arbitrary orientation supported from two ends acted upon with a force at the mid point. A composite consisting of stainless-steel reinforced aluminium is used for this work. Yield points are calculated for 0°, 30°, 45°, 60° and 90° orientation angles. The Tsai-Hill theory is used as a yield criterion. ax and T xy elastic stresses is obtained according to the x coordinates of the beam.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışmada, orta noktasından P yüküne maruz her iki tarafından desteklenmiş metal matriksli kompozit bir kiriş için analitik olarak elastik gerilme analizi yapılmıştır. Bu çalışma için malzeme olarak paslanmaz çelik takviyeli alüminyum matriksli kompozit kullanılmıştır. 9=0°, 30°, 45°, 60° ve 90° oryantasyon açıları için akma noktaları hesaplanmıştır. Akma teorisi olarak Tsai-Hill teorisi kullanılmıştır. Çözüm sonucunda kirişin x koordinatına göre ax ve Txy elastik gerilmeleri elde edilmiştir.
FULL TEXT (PDF): 
PDF icon arastirmax-orta-noktasindan-p-yukune-maruz-her-iki-tarafindan-desteklenmis-metal-matriksli-kompozit-bir-kiris-icin-elastik-gerilme-analizi.pdf
  • 1
81
86
  • Turkish

REFERENCES

References: 

Bahei-El-Din, Y.A. and Dvorak, G. J.
1982
. Plasticity Analysis of Laminated Composite Plates, Journal of Applied Mechanics, ASME, 49, 740-746.
Bassiouni, A.S., Gad-Elrab, R.M and Elmahdy, T. H. 1999. Dynamic Analysis for Laminated Composite Beams, Composite Structures, 44, 81-87.
Corvi, A. 1990. A Preliminary Approach to Composite Beam Design Using FEM Analysis,
Composite Structures, 19, 259-275.
Daehn, G.S., Starck, B., Xu, L., Elfishawy, K.F.,
Ringnalda, J and Fraser, H.L. 1996. Elastic and Plastic Behaviour of a Co-Continuous Alumina/Aluminium Composite, Acta Materialia,
44, 249-261.
Esendemir, Ü. 2002. An Elasto-Plastic Stress Analysis in a Polymer Matrix Composite Beam of Arbitrary Orientation Subjected to Transverse Linearly Distributed Load, Journal of Reinforced Plastics & Composites, 21, 735-748.
Fraternali, F and Bilotti, G. 1997. Nonlinear Elastic Stress Analysis in Curved Composite Beams, Computers & Structures, 62, 837-859.
Jones, R.M. 1975. Mechanics of Composite Materials, Mc.Graw-Hill, Kogahusha, Tokyo.
Jones, R.M. 1975. 'Mechanics of Composite Materials', McGraw-Hill Kogakusha,Tokyo.
Karakuzu, R., Özel, A and Sayman, O. 1997. Elastic-Plastic Finite Element Analysis of Metal Matrix Plate with Edge Notches, Computers &
Structures, 63, 551-558.
Kenny, J.M and Marchetti, M. 1995. Elasto-Plastic
Behaviour of Thermoplastic Composite Laminates Under Cycling Loading, Composite Structures, 32,
375-382.
Kerti,
I.Ç.
, Topuz, A., Birol, Y. 1997. Gaz Enjeksiyon Yöntemi ile Tic Takviyeli Alüminyum Matrisli Kompozit Üretimi, 7. Denizli Malzeme Sempozyumu, 72-78.
Krawczuk, M. 1994. A New Finite Element for the Static and Dynamic Analysis of Cracked Composite Beams, Computers & Structures, 12, 551-561.
Lekhnitski, S.G. 1981. Theory of Elasticity of an Anisotropic Body, Mir Publishers, Moscow.
Sayman, O and Esendemir, Ü. 2002. An Elastic-Plastic Stress Analysis on a Thermoplastic Composite Beam of Arbitrary Orientation Supported from Two Ends Acted Upon with a Force at the Midpoint, Journal of Reinforced Plastics & Composites, 21, 473-485.
Sayman, O
and Özer, M.R. 2001. Elastic-Plastic Thermal Stress Analysis of Aluminum-Matrix Composite Beams Under a Parabolically Temperature Distribution, Composite Science and Technology, 61, 2129-2137.
Sayman, O. 1998. Elasto-Plastic Stress Analysis in Stainless Stell Fiber Reinforced Aluminum Metal Matrix Laminated Plates Loaded Transversely, Journal of Composite Structures, 43, 147-154.
Sayman, O., Aksoy, S. 1982. Kompozit Malzemeler, Ege Üniversitesi Matbaası, İzmir.
Subramanian, P.
2001
. Flexural Analysis of Symmetric Laminated Composite Beams Using Finite Element, Composite Structures, 54, 121-126.
Şahin., Ş. 2000. Kompozit Malzemelere Giriş, Gazi Kitabevi Tic. Ltd. Şti, Ankara.

Thank you for copying data from http://www.arastirmax.com