Buradasınız

Anasayfa » Content

AISI 1030 ÇELİĞİNİN AŞINDIRICILI SU JETİ İLE KESİLMESİNDE YÜZEY PÜRÜZLÜLÜĞÜNÜN VE KESME ÖNÜ GEOMETRİSİNİN İNCELENMESİ

INVESTIGATION SURFACE ROUGHNESS AND CHARACTERIZATION OF CUTTING FRONT SIDE GEOMETRY IN THE CUTTING OF AISI 1030 MATERIAL WITH ABRASIVE WATER JET

Journal Name:

  • Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi

Publication Year:

  • 2009

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
Abrasive water jet (AWJ) is used as a new and alternative cutting technique in industry to form the materials that are hard to cut. In this study, AISI 1030 steel samples in different thickness were cut with AWJ process. The samples were cut with different cutting speeds. The effect of cutting speed on the surface characteristics was investigated. The results of the study show that AWJ can be used as an effective cutting process to form sharp corners and edges.
Bookmark/Search this post with
Abstract (Original Language): 
Alternatif bir üretim yöntemi olarak gündeme gelen aşındırıcı su jeti (ASJ) ile kesme, endüstriyel amaçlı malzemelerdeki gelişmelere paralellik gösterecek şekilde, işlenmesi güç malzemelerin biçimlendirilmesinde etkili bir yöntem olarak kullanılmaktadır. Bu çalışmada, endüstride yaygın kullanılan AISI 1030 malzemeden hazırlanan farklı kalınlıklardaki numuneler işleme parametrelerinden yanal hız değişken, diğer parametreler sabit tutularak, ASJ ile kesilmiş ve elde edilen yüzeylerin kesme önü geometrisi karakterize edilmiştir. Elde edilen sonuçlar dik kenar, keskin köşe ve benzeri yüzeylerin işlenmesinde aşındırıcılı su jeti ile kesme metodunun kullanılabileceğini göstermiştir.
FULL TEXT (PDF): 
PDF icon arastirmax-aisi-1030-celiginin-asindiricili-su-jeti-ile-kesilmesinde-yuzey-puruzlulugunun-kesme-onu-geometrisinin-incelenmesi.pdf
  • 1
1
11
  • Turkish

REFERENCES

References: 

Akkurt, A. 2005. "Ticari saf alüminyum ve Al-6061 alüminyum alaşımı malzemelerin aşındırıcı su jeti ile kesilmesi uygulamalarında kesme hızının yüzey pürüzlülüğüne etkisi". G.Ü., Teknik Eğitim Fakültesi, Politeknik Dergisi. Cilt: 8, Sayı: 1, s. 69-79, Ankara.
Akkurt, A. 2002. "Çeşitli malzemelerin aşındırıcı su jeti ile kesilmesinde yüzey özellikleri, sertlik ve mikro yapı değişimlerinin farklı kesme yöntemleriyle karşılaştırmalı olarak incelenmesi", Doktora Tezi. G.Ü., Fen Bilimleri Enstitüsü, Ankara.
Akkurt, A. Şeker, U. Ercan, F. 2002. "Aşındırıcılı su jeti (ASJ) ile işlemede enerji kaybı olayının deneysel tahmini, karakterizasyonu ve modellemesi-yapılan çalışmaların
değerlendirilmesi". G.Ü., Teknik Eğitim Fakültesi, Politeknik Dergisi. Cilt: 5 Sayı: 2, pp. 137-147, Ankara.
Blickwedel, H. 1990. "Erzeugung und wirkung von hochdruck-abrasivstrahlen", Dissertation, in: Fortschritt-Berichte VDI, Reihe 2; Fertigungstechnik, Nr. 206, VDI University Hannover, Verlag.
Blickwedel, H., Guo, N. S., Haferkamp, H., Louis, H. 1990. "Prediction of abrasive jet cutting performance and quality", Proceedings of 9th International Symposium on Jet Cutting Technology. pp. 163-179, BHRA, Fluid Engineering Centre, Cranfield, UK.
Engel,
S.L.
, Labus, T.J. 1993. "Industrial applications and comparison of lazer and abrasive waterjet technologies", Fluid Jet Technology- Fundamentals and Applications. 2nd Ed., ISBN 1-880342-01-4, Publ. by the WJTA, St. Louis, MO, USA.
Fukunishi, Y., Kobayashi, R., Uchida, K. 1995. "Numerical simulation of striation on water jet cutting surface", Proc. of 8th American Water Jet Conference, pp. 157-169, Houston, USA.
Guo, N. S., Louis, H., Meier, G. 1992. Recycling capability of abrasive water jet cutting" In:Lichtarowicz A(1992) jet Cutting Technol.,
Kluwer Acad, Publ., Dordrecht. pp. 503-523.
Hashish, M. 1982. "Steel cutting with abrasive water jets", Proceedings of 6th International Symposium on Jet Cutting Technology, Paper K3, University of Surrey, UK.
Hashish, M. 1984. "A Modeling study of metal cutting with abrasive waterjets", ASME Journal of Engineering Materials and Technology. Vol, 106, No. 1, pp. 88-100.
Hashish, M. 1987. "Prediction of depth of cut in abrasive waterjet (ASJ) machining", Modeling of Materials Processing, Ed A.A. Tseng; ASME, MD. Vol. 3.
Hashish, M. 1988. "Applications of metal cutting with abrasive-waterjets", Proceedings: Conference of Nontraditional Machining. pp. 1-11.
Hashish, M. 1989. "Characteristics of surfaces machined with abrasive waterjets machining characteristics of advanced meterials", Winter Annual Meeting of ASME, pp. 23-32, San Francisco, USA.
Hashish, M. 1991. "Caracteristics of surfaces machined with abrasive waterjet", J.of Eng. Mat. And Tech., Vol. 113, pp.354-362.
Hashish, M. 1993a. "Prediction models for ASJ machining operations", 7th American Water Jet Conference, pp. 205-216, Seattle, USA.
Hashish, M. 1993b. "The effect of beam angle in abrasive waterjet machining", Journal of Engineering for Industry. Vol. 115, pp. 51-56.
Hutchings, I. M. 1979. "Mechanical and metallirgical aspects of the erosion of metals",. In: Levy A V (ed) 1979 Proc. Corrsion/Erosion of Coal Convers. Syst. Mat. Conf., pp. 393-428, Houston.
Juo, N. S., Louis, H., Meier, G. 1993. "Surface structure and kerf geometry in abrasive water jet cutting: formation and optimization", Proceedings of the 7th American Waterjet Conference, Seattle WA, USA. pp. 1-26.
Kovacevic, R. 1991. "Surface texture in abrasive waterjet cutting", Journal of Manufacturing Systems, Vol. 10, No : 1, pp. 32-40.
Kovacevic, R., Mohan, Dl., Zhang, Y.M. 1995. "Cutting force dynamics as a tool for surface profile monitoring in ASJ", Journal of Engineering for Industry, Vol. 117, pp. 340-350.
Momber, A. 1995. "A simplified mathematical energy dissipation model for water jet and abrasive water jet cutting processes", 8th Amer. Water Jet Conference, pp. 829- 843, August 26-29, Houston.
Mühendislik Bilimleri Dergisi 2009 15 (1) 1-11
10
Journal of Engineering Sciences 2009 15 (1) 1-11
AISI 1030
Çeliğinin
Aşındırıcılı Su Jeti ile Kesilmesinde Yüzey Pürüzlülüğünün ve Kesme Önü Geometrisinin İncelenmesi, A. Akkurt
Momber, A.W., Kovacevic, R., 1988, "Principles of ASJ machining", Springer-Verlag London Limited,
pp. 284 -324 UK.
Momber, A.W., Kovacevic, R. 1988. "Principles of ASJ machining", Springer-Verlag London Limited,
pp. 284 -324 UK.
Momber. A. W., Kovacevic, R., Kwak, R., Mohan. R.
1995
. "Experimental estimation of energy dissipative processes in workpieces during abrasive water jet cutting", 8th American Water Jet Conference, August 26-29. Houston, Texas.
Momber, A. 1994. "Schneidversuche an stahlbeton mit dem abrasiv-druckwasserstrahlen", On und Stahlbetonbau, Vol. 89. pp.132-134.
Mozurkiwicz, M., Fincuan, L., Ferguson, R. 1988. Investigation of abrasive cutting head internal parameters , In.: Woods P A (Ed) 1988 Proc. 9 th. Int. Symp. Jet Cutting Techn, BHRA Fluid Engng Cranfield.
Niu, M., Fukunishi, Y., Sawamura T. 1996. "Control of striated roughness on the surface cut by abrasive water jet", BHR Group Jetting Technology. pp. 769-777. Ishinomaki Senshu University. Japan.
Ohlsson, L. 1995. "The theory and practice of abrasive water jet cutting", PhD Thesis, Lulea University of Technology. pp, 81-93, Sweden.
Ohlsson, L., Powell, J., Magnusson, C. 1994. "Mechanisms of striation formation in abrasive
waterjet cutting", Procedings of the 12th. Int. Conf. Or Jet Cutting Technology. pp. 151-164, France.
Öjmertz,
C
. 1997. "A Study on abrasive waterjet milling", Department of Production Engineering, Thessis for Degree of Doctor of Philosophy, March-Sweden.
Raju, S. P., Ramulu, M. 1994. "Predicting hydro-abrasive erosive wear during abrasive water jet cutting", ASME, Manufacturing Science and Engineering. pp. 339-351, New York.
Singh, P. L., Chen, W.L., Munoz, I. 1991. "Comprehensive evaluation of abrasive waterjet cut surface quality", 6th American Water Jet Conference. pp. 139-161, Houston, USA.
Tan, D. K. M. 1986. "A model for the surface finish in abrasive waterjet cutting", Proceedings of 8th International Symposium on Jet Cutting Technology. pp. 31-38, England.
Zaring, K. 1989. "Advanced abrasive-waterjet hardware and cutting performance", Proceedings of the 5th American Water Jet Conference, August 29-31. pp. 473-481. Toronto, Canada.
Zeng, J., Hines. R., Kim. T. J. 1991. "Characterization of energy dissipation Pphenomena in abrasive water jet cutting", Proceeding of the 6th American Water Jet Conference. pp. 163-177, Water Jet Technology Association, St. Louis.

Thank you for copying data from http://www.arastirmax.com