Buradasınız

Anasayfa » Content

EKSENEL PİSTONLU POMPA VE MOTORLARDA KAYICI PAPUÇ PERFORMANS ARAŞTIRMASI-AKIŞ VE VİSKOZ GÜÇ KAYBI

SLIPPER PERFORMANCE INVESTIGATION IN AXIAL PISTON PUMPS AND MOTORS-FLOW AND VISCOUS POWER LOSSES

Journal Name:

  • Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi

Publication Year:

  • 1997

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
In this study, the slippers being the most effective on the performance of swash plate type axial piston pumps and motors, which is a good example of hydrodynamic-hydrostatic bearing applications, have been investigated. With respect to this, having derived the viscous moment loss, viscous flow leakage loss and power loss equations, the variations of these parameters under different operating conditions have been examined experimentally.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışmada, hidrostatik-hidrodinamik yatakların iyi bir uygulama alanı olan, eğik plakalı eksenel pistonlu pompa ve motorların performansı üzerinde etkili olan kayıcı pabuçlar incelenmiştir. Bununla ilgili olarak viskoz moment kayıpları, viskoz akışkan kaçağı ve güç kayıp denklemleri elde edilip, değişik çalışma ortamlarında bu karakteristik parametrelerin değişimi ve mukayesesi deneysel olarak incelenmiştir.
FULL TEXT (PDF): 
PDF icon arastirmax-eksenel-pistonlu-pompa-motorlarda-kayici-papuc-performans-arastirmasi-akis-viskoz-guc-kaybi.pdf
  • 1
305
311
  • Turkish

REFERENCES

References: 

Canbulut, F. 1990. Eğik Plakalı Eksenel Pistonlu Pompalarda Hidrostatik-Hidrodinamik Prensipli Pabuçların Teorik ve Deneysel Analizi, Erciyes Üniversitesi Fen Bilimleri Enstitüsü, Doktora Tezi, Kayseri.
Crook, A., Fisher, M. 1969. An Investigation into the Dynamic Behaviour of Hydrostatic Slipper
Bearings, BHRA RR 1023.
Hooke, C. J. and Kakoullis, Y. P. 1978. The Lubrication of Slippers in Axial Piston Pumps, Proc. of the Fifth Inter. Symposium on Fluid Power, paper B2, 13-26.
Hooke, C. J. and Kakoullis., Y. P. 1981. The
Effects of Centrifugal Load and Ball Friction on the Lubrication of Slippers in Axial Piston Pups, 6 th International Fluid Power Symposium, paper
D2, 179-191.
Hooke, C. J. and Kakoullis, Y. P. 1983. The Effects of Non-Flatness on The Performance of Slippers in
Mühendislik Bilimleri Dergisi 1997 3 (1)
311
Journal of Engineering Sciences 1997 3 (1)
Pompa ve Motorlarda Kayıcı Papuç Performans Araştırması, A.O. Kurban, E. Koç, F.Canbulut
Axial Piston Pumps, Proc. Inst. Mech. Eng., 197 C,
239-247.
Hooke, C. J. and Li, K. Y. 1988. The Lubrtication of
Over-Clamped Slippers in Axial Piston Pumps-Centrally Looded Behaviour., Proc., Inst. Mech.
Eng., 202, 287-293.
Howarth, R. B. and Newton, M. J. 1971. "Investigation of the Effects of Tilt and Sliding on the Performance of Hydrostatic Thrust Bearings", Conf. On Externally Pressurized Bearings, I.
Mech. E.
Koç,
E
. 1989. An Experimental Investigation into the Performance of Offset Loaded Hydrostatic Slippers in Axial Piston Pumps-The Effect of Overclamp Ratio, Doğa, T. Journal of Eng. and Environ., 13 (3), 333-352.
Koç,
E
. 1990. An Experimental Investigation into the Performance of Hydrostatic Slipper in Axial Piston Pumps-The Effect of Orifice Size. Doğa, T. Journal of Eng. and Env. 14 (4), 505-514.
Shute, N. A., Turnbull, D. E. 1964. Review of Some Recent Developments In the Dedign of Axial Pişton Machines, The British Hydromechanics Research Association, TN 793.
Shute, N. A., Turnbull, D. E. 1960. An Experimental Study of the Lift of Simple Hydrostatic Slipper
Bearing, BHRA. RR 659.
Shute, N. A., Turnbull, D. E. 1962. The Losses of Hydrostatic Slipper Bearings Under Various Operating Condition., BHRA. RR 743.

Thank you for copying data from http://www.arastirmax.com