Buradasınız

Anasayfa » Content

SİNTERLENMİŞ BRONZ YATAKLARDA PERFORMANS KARAKTERİSTİKLERİNİN SÜRTÜNME KATSAYISINA ETKİLERİ

THE EFFECTS OF PERFORMANCE CHARACTERISTICS TO THE COEFFICIENT OF FRICTION IN SINTERED BRONZE BEARINGS

Journal Name:

  • Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi

Publication Year:

  • 2001

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
In this study, the effects of performance characteristics of self-lubricating, sintered bronze journal bearings to the coefficient of friction is investigated via an experimental test rig. In the experiments, the variation of the coefficient of friction for different velocities and pressures has been investigated for the cases in which an additional oil mass is fed and not fed into the bearing. Furthermore, in the cases where the other parameters are kept constant, the effects of velocity, pressure and temperature to the coefficient of friction are separately investigated, and the results are plotted.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışmada kendinden yağlamalı yatak olarak da isimlendirilen sinterlenmiş bronzdan imal edilmiş kaymalı yatakların performans karakteristiklerinin sürtünme katsayısına etkileri bir deney sistemiyle incelenmiştir. Bu deney sisteminde farklı hızlar ve basınçlar için yatağa belirli bir debide ilave yağın gönderildiği ve gönderilmediği hallerde sürtünme katsayısının değişimi ve bundan başka diğer parametrelerin sabit tutulduğu hallerde hızın, basıncın ve sıcaklığın sürtünme katsayısına etkileri ayrı ayrı araştırılıp, sonuçlar diyagramlar şeklinde verilmiştir.
FULL TEXT (PDF): 
PDF icon arastirmax-sinterlenmis-bronz-yataklarda-performans-karakteristiklerinin-surtunme-katsayisina-etkileri.pdf
  • 1
11
16
  • Turkish

REFERENCES

References: 

Braun, A. L.
1982
. Porous Bearings. Tribol. Int., Vol. 15, No. 5, p. 235.
Cieslicki, K. M. and Krzeminski, K. 1995. Spatial Anisotropy of Permeability in Sleeve Bearings. Int. J. Powder Metall., Vol. 31, No. 3, pp. 221-229.
Cieslicki, K. M. and Krzeminski, K. 1996. Porous Sleeve Bearings : Air and Oil Permeability. Int. J.
Powder Metall., Vol. 32, No. 2, pp. 175-183.
Kaneko, S. and Hashimoto, Y. 1995. A Study of the Mechanism of Lubrication in Porous Journal Bearings-Effects of Dimensionless Oil-Feed Pressure
on Frictional Characteristics. Trans. ASME, J. Tribol., Vol. 117, No. 2, pp. 291-296.
Kaneko, S. and Obara 1990. Experimental Investigation of Mechanism of Lubrication in Porous Journal Bearings : Part 1 - Observation of Oil Flow in Porous Matrix. Trans. ASME, J. Tribol., Vol. 112, No. 4, p. 618.
Kaneko, S., Inoue, H. and Ushio, K. 1994a. Experimental Study on Mechanism of Lubrication in Porous Journal Bearings-Oil Film Formed in
Bearing Clearance. JSME Int. J., Ser. C, Vol. 37, No. 1, pp. 185-192.
Kaneko, S., Ohkawa, Y. and Hashimoto, Y. 1994b.
A Study of the Mechanism of Lubrication in Porous Journal Bearings - Effects of Dimensionless Oil-Feed Pressure on Static Characteristics Under Hydrodynamic Lubrication Conditions. Trans ASME, J. Tribol., Vol. 116, No. 3, pp. 606-611.
Mantell, C. L. 1958. Engineering Materials Handbook, McGraw-Hill, NewYork, p. 22-10.
Morgan, V. T. and Cameron, A. 1957. "Mechanism of Lubrication in Porous Metal Bearings" Proc. Conf. on Lubr. and Wear, Inst. Mech. Eng., London, p.151.
O'Connor, J. J. and Boyd, J. 1968. Standard Handbook of Lubrication Engineering, McGraw-Hill, New York, p. 9-15.
Pratt, G. C. 1973. Materials for Plain Bearings.
International Metallurgical Reviews, Vol. 18, Review 174, pp. 23-25.
Samerski, L. 1974. Belastbarkeit und Lebensdauer Von Sinterlagern. Bosch Techn. Berichte, Band 4,
Heft 6, s. 263-272.

Thank you for copying data from http://www.arastirmax.com