Buradasınız

Anasayfa » Content

SİLİS DUMANI KATKILI TAŞIYICI HAFİF BETONUN MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI

THE INVESTIGATION OF THE MECHANICAL PROPERTIES OF STRUCTURAL LIGHTWEIGHT CONCRETE WITH SILICA FUME ADMIXTURE

Journal Name:

  • Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi

Publication Year:

  • 2006

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
This paper reports results of a study conducted to evaluate the investgation of the mechanical properties of lightweight concrete made with pumice as aggregate and silica fume (SD) as mineral admixture. In the study, the tests of compressive strength, split tensile strength and ultrasonic pulse velocity were applied to the samples whose ages are 3, 7, 14 and 28 days. Pumice stone was used as coarse aggregate and natural sand as fine aggregate in specimens prepared. SD was replaced with 10 % of CEM I 42.5 N by weight. According to the outputs of the study it was observed that the strength properties of concrete specimens (SDB) prepared with SF is better than control concrete (KB) specimens. While in the first days the KB specimens showed similar properties with the SDB, After 7 days the SDB specimens showed higher strength.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışmada, mineral katkı olarak silis dumanı (SD) ve agrega olarak pomza taşı kullanılarak elde edilen taşıyıcı hafif betonun mekanik özellikleri araştırılmıştır. Çalışmada, basınç dayanımı, yarmada çekme dayanımı ve ultrasonik ses geçirgenlik (USG) deneyleri 3, 7, 14 ve 28 günlük numunelere uygulanmıştır. Numunelerin hazırlanmasında ince agrega olarak nehir kumu, kaba agrega olarak ise pomza taşı kullanılmıştır. SD ağırlıkça CEM I 42.5 N çimentosu ile % 10 oranında yer değiştirilmiştir. Çalışmadan elde edilen sonuçlara göre silis dumanı katkılı beton (SDB) numunelerin her yaşta kontrol betonuna (KB) göre daha iyi dayanım özellikleri sergilediği görülmüştür. KB numuneleri ilk yaşlarda SDB numuneleri ile benzer özellikler sergilerken özellikle 7 günlük kür süresinden sonra SDB numunelerinde belirgin bir dayanım artışı gözlenmiştir.
FULL TEXT (PDF): 
PDF icon arastirmax-silis-dumani-katkili-tasiyici-hafif-betonun-mekanik-ozelliklerinin-arastirilmasi.pdf
  • 1
22 - 27
  • Turkish

REFERENCES

References: 

[1]. Kok, S. C., Min-Hong, Z., Water Permeability and
Chloride Penetrability of High-Strength Lightweight
Aggregate Concrete, Cement and Concrete Research,
No 32, pp. 639-645, 2002.
[2]. Sari, D., Pasamehmetoglu, A. G., The Effects of
Gradation and Admixture on the Pumice Lightweight
Aggregate Concrete, Cement and Concrete Research,
No 35 (5), pp. 936-942, 2005.
[3]. Haque, M.N., Al-Khaiat, H., Kayali, O., Strength and
Durability of Lightweight Concrete, Cement and
Concrete Composites, No 26, pp. 307-314, 2004.
[4]. Giaccio, G., Rocco, C., Violini, D., Zappitelli J.,
Zerbino, R., High-Strength Concrete Incorporating
Different Coarse Aggregates, ACI Matter, No 89 (3),
pp. 242-246, 1992.[5]. Baalbaki, W., Benmokrance, B., Chaallal, O., Aition,
P.C., Influence of Coarse Aggregates on Elastic
Properties of High Performance Concrete, ACI Matter,
No 88 (5), pp. 499-503, 1991.
[6]. Nilsen, A.U., Monteiro, J.M., Gjorv, O.E., Estimation
of the Elastic Modulus of Lightweight Aggregate,
Cement and Concrete Research, No 25 (2), pp. 276-
280, 1995.
[7]. Yang, C.C., Huang, R, A Two-Phase Model for
Predicting the Compresive Strength of Concrete,
Cement and Concrete Research, No 26 (10), pp. 1567-
1577, 1996.
[8]. Lydon, F.D., Concrete Mix Design, Applied Science
Publishers, 2nd ed., London, 1982.
[9]. Topcu, İ.B., Semi-Lightweight Concretes Produced by
Volcanic Slags, Cement and Concrete Research, No
27, pp. 15-21, 1997.
[10]. Al-Khaiat, H., Haque, M.N., Effect of Initial Curing
on Early Strength and Physical Properties of
Lightweight Concrete, Cement and Concrete Research,
No 28, pp. 859-866, 1998.
[11]. Yasar, E., Atis, C. D., Kilic, A., Gulsen, H., Strength
Properties of Lightweight Concrete Made with Basaltic
Pumice and Fly Ash, Materials Letters, No 57, pp.
2267-2270, 2003.
[12]. TS EN 12390-3, Beton-sertleşmiş beton deneyleribölüm
3: Deney numunelerinde Basınç dayanımının
tayini, TSE, Ankara, 2003.
[13]. TS EN 12390-6, Beton-sertleşmiş beton deneyleribölüm
6: Deney numunelerinin Yarmada Çekme
Dayanımının Tayini, TSE, Ankara, 2002.
[14]. Erdoğan, T .Y., Beton, ODTÜ Geliştirme Vakfı
Yayıncılık ve İletişim A.Ş. Yayını, Ankara, 2003.
[15]. ASTM C 597, Standart Test Method For Pulse
Velocity Through Concrete, Annual Book of ASTM
Standards, 1994.
[16]. Almussalam, A.A., Beshr, H., Maslehuddin, M., Al-
Moudi, O.S.B., Effect of Silica Fume on the
Mechanical Properties of Low Quality Coarse
Aggregate Concrete, Cement and Concrete
Composites, No 26, pp. 891-900, 2004.
[17]. Khatri, R.P., Sirivivathnanon V., Effect of Different
Supplementary Cementitious Materials on
Mechanical Properties of High Performance
Concrete, Cement Concrete Research, No 25 (1), pp.
209-220, 1995.
[18]. Demirboğa, R., Türkmen, İ., Karakoç, M., B.,
Relationship Between Ultrasonic Velocity and
Compressive Strength for High-Volume Mineral-
Admixtured Concrete, Cement and Concrete
Research, No 34, pp. 2329-2336 2004.
[19]. Zaina, M.F.M., Mahmud H.B., Ilham A., Faizal, M.,
Prediction of splitting tensile strength of highperformance
concrete, Cement and Concrete
Research, No 32, pp.1251–1258,2002.

Thank you for copying data from http://www.arastirmax.com