Buradasınız

Anasayfa » Content

SINIR ELEMAN VE SONLU ELEMAN METOD YARDIMIYLA ZİNCİR BAKLASININ GERİLME DAĞILIMI

STRESS DISTRIBUTION OF THE CHAIN LINK BY MEANS OF BOUNDARY ELEMENT AND FINITE ELEMENT METHODS

Journal Name:

  • Sigma Mühendislik ve Fen Bilimleri Dergisi

Publication Year:

  • 2004

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
Finite and boundary element methods are the well known and the frequently used methods of continuum mechanics. The theoretical differences and the superiorities of the techniques over each other are widely investigated in literature. In the study, roller chains which are used as pulling and driving members of materials handling mechanisms are inspected. Stress analysis of a standard roller chain link is performed using both boundary and finite element methods. The mechanical behaviors of a standard roller chain which is loaded by the maximum allowed load are considered. Comparing the results of the both techniques with each other and the results of literature, the appropriate method for the roller chain problem is proposed.
Bookmark/Search this post with
Abstract (Original Language): 
Sonlu eleman ve sınır eleman metodları, sürekli ortam mekaniği problemlerinin incelenmesinde yaygın olarak kullanılan metodlardır. Her iki metodun birbirinden teorik farklılıkları ve üstüklükleri, literatürde yaygın olarak incelenmektedir. Bu çalışmada, transport makinalarının çekme ve tahrik elemanı olarak kullanılan makaralı zincirler ele alınmıştır. Standart makaralı zincir baklasının gerilme analizi, hem sınır eleman hem de sonlu eleman metodlarıyla gerçekleştirilmiştir. Maksimum yükleme halindeki standart makaralı zincirin mekanik davranışları gözönüne alınmıştır. Her iki metodun sonuçları birbirileriyle ve literatürdeki sonuçlarla karşılaştırılarak, makaralı zincir probleminin çözümü için en uygun metod önerilmiştir.
FULL TEXT (PDF): 
PDF icon arastrmx_845_22_pp_255-263.pdf
  • 4
255-263
  • Turkish

REFERENCES

References: 

[1] Mulcahy, D. E., “Materials Handling Handbook”, McGraw-Hill, New York, 1999.
[2] Jones, L. (Ed.), “Mechanical Handling with Precision Conveyor Chain”, Hutchinson &
Co., London, 1971.
[3] Faulkner, L. L. and Menkes, S. B. (Ed.), “Chains for Power Transmission and Material
Handling”, American Chain Association Publications, 1982.
[4] Antonescu, N. N., “Stresses in Roller Chain Link Plate”, Rev. Roum Sci. Techn.-Mec.
Appl., 20 (2) 311-322, 1975.
[5] Zade, M. M., “Reduction of Stress Concentration in The Lugs of Roller Chain Plates”,
Russian Engineering Journal, 59 (7) 33-44, 1979.
[6] Eldiwany, H. B. and Marshek, K. M., “Experimental Load Distribution for Double Pitch
Steel Roller Chain on Steel Sprockets”, Mechanisms & Machine Theory, 19 (6) 449-457,
1984.
[7] Abdulaliyev, Z. and Toprak, T., “A New Stress Analysis Criteria for Roller Chain Plate”,
Elevator Technology 9, Proceedings of ELEVCON’98, Publ. by the IAEE, Zurich 1998,
1-10.
[8] Arslan, N. And Kaman, M.O. "Termoplastik Rulolu Zincir Baklalarının Geometrik
Parametrelerin Elasto-plastik Davranışa Etkisi ", 9. Uluslararası Makina Tasarım ve
İmalat Kongresi Bildiriler Kitabı, ODTÜ Ankara 2000, 165-178.
[9] Becker, A.A.,”The Boundary Element Method in Engineering”, McGraw-Hill,
Cambridge, 1992.
[10] Zienkiewicz, O. C., “The Finite Element Method”, Third Edition, McGraw-Hill
Publishing Company, 2001.
[11] Brebbia, C. A. and Dominguez, J., “Boundary Elements An Introductory Course,
Computational Mechanics Publications”, McGraw-Hill Company, Southampton Boston,
1992.
[12] Kesikçi, M. K., “The Stress Analysis of The Chains By Using Boundary and Finite
Element Methods”, M.Sc. Thesis, ITU, Institute of Science and Technology, İstanbul,
2003.
[13] Moaveni, S., “Finite Element Analysis: Theory and Application with ANSYS”, Prentice
Hall, New Jersey, 1999.
[14] Gupta, O. P., “Finite and Boundary Element Methods in Engineering”, Lisse,
Netherlands, Exton, PA, 1999.
[15] Kesikçi, M.K. Gerdemeli, İ., İmrak, C.E., “Stress Analysis of Roller Chain Links of
Transport Systems By Boundary Element Method”, Elevator Technology 14, Proceedings
of ELEVCON 2004, Nisan 2004 İstanbul, 145-154.

Thank you for copying data from http://www.arastirmax.com