Buradasınız

DOKUMA KUMAŞLARDA ÇÖZGÜ GERGİNLİĞİ İLE KIVRIM İLİŞKİSİNİN TEORİK ANALİZİ

A Theoretical Analysis of Relation Between Warp Tension and Crimp in Woven Fabrics

Journal Name:

Publication Year:

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
In this paper, warp tension-crimp relation in grey woven fabrics is obtained from Başer’s (1982) large deformation and approximate linear theories and compared with experimental results. Twisted poliester warp yarn and cotton carded ring spun weft yarns are used in weaving fabrics. Different fabric constructions were woven by changing weft density, weft yarn count and warp tension during weaving. When the conclusions of approximate linear and large deformation theories are compared with the experimental results in terms of the relation between warp tension and crimp, it has been found out that the approximate theory gives similar results to experimental results in terms of warp crimp change in the grey fabric and the large deformation theory also gives similar results to experimental results in terms of weft crimp in the grey fabric.
Abstract (Original Language): 
Bu çalışmada, ham kumaştaki çözgü gerginliği-kıvrım ilişkisi, Başer (1982)’e ait yaklaşık ve kesin teoriler esas alınarak incelenmiş, deneysel çalışmalardan elde edilen sonuçlarla karşılaştırılmıştır. Dokuma kumaşlarda bükümlü polyester çözgü ipliği ile karde pamuk atkı iplikleri kullanılmıştır. Kumaşlar, çözgü gerginliğini, atkı iplik numarasını ve atkı sıklığını değiştirerek dokunmuştur. Kıvrım gerginlik ilişkisi açısından, kesin ve yaklaşık teoriden elde edilen sonuçlar deneysel sonuçlarla karşılaştırıldığında, ham kumaştaki çözgü kıvrım değişimi açısından yaklaşık teorinin, ham kumaştaki atkı kıvrım değişimi açısından da kesin teorinin deneysel sonuçlarla uyumlu sonuçlar verdiği görülmüştür.
127-138

REFERENCES

References: 

1. ASTM standards specifications (1999) IS: ASTM D3883-04 (ASTM International, West Conshohocken,
USA).
2. Başer, G. (1982) Tezgahta Oluşan Kumaş Yapısının Belirlenmesi ve Dokuma Sonrası Boyut Değişimlerinin
Analitik Yöntemlerle İncelenmesi Üzerine Araştırmalar, Doçentlik Tezi, Ege Üniversitesi Tekstil Mühendisliği
Bölümü, İzmir, 183 s.
3. Chahal, V., Mohamed, H. (1986) Measuring Filling Yarn Tension and Its Influence on Fabrics Woven on
Projectile Weaving Machine, Textile Research Journal, 56(5):324-333.
4. Eren, R. (1993) An Integrated Electronic Control of Take-up and Let-off Motions in a Weaving Machine,
Ph.D thesis, UMIST, Manchester.
5. Hamilton, J.B. (1964) A General System of Woven Fabric Geometry, Journal of the Textile Institute, 55: 66-
82.
6. Kawabata, S., Masako, N., (1973) Kawai, H. The Finite Deformation Theory of Plane-Weaev Fabrics. Part
II: The Uniaxial-Deformation Theory, Journal of the Textile Institute, 64(2): 47-61.
7. Kemp, A. (1958) An Extension of Pierce’s Cloth Geometry to the Treatment of Non Circular Threads,
Journal of the Textile Institute, Vol:49.T44.
8. Leaf, G.A.V., Anandjiwala, R.D. (1985) A Generalized Model of Plain Woven Fabrics, Textile Research
Journal, 55:92-99.
9. Olofsson, B. (1964) A General Model of a Fabric As a Geometric-Mechanical Structure, Journal of the
Textile Institute, 55(11): 541-557.
10. Özkan, G., (2007) Bezayağı Dokuma Kumaşlarda Çözgü Gerginliği ile Çözgü ve Atkı Kıvrımı Arasındaki
İlişkinin Deneysel Olarak Araştırılması, Tekstil ve Mühendis, 13(62-63):22-27.
11. Peirce, F.T. (1937) Cloth Geometry, Journal of the Textile Institute, Vol:28(3). p 45-96.

Thank you for copying data from http://www.arastirmax.com