1. Ghassan AC. Performance of wood members strengthened with fiber reinforced polymers (FRP). Research Structural Engineer ERDC-CERL, 2011: 37.
2. Heiduschke A, Cabrero JM, Manthey C, Haller P and Günther E. Mechanical behaviour and life cycle assessment of fibre-reinforced timber profiles. in: Braganca L, Koukkari H, Blok H, Cervasio R, Velkovic MR, Plewako UV, Landolfo
Çetin Yerlikaya / Usak University Journal of Material Sciences 1 (2013) 7 – 22
22
Z, Silva L and Haller P. (Eds.) COST C25 Sustainability of Constructions - Integrated Approach to Lifetime Engineering. COST C-25; European Commission: Dresden. 2008: 3.38–3.46.
3. Stevens ND and Criner GK. Economic analysis of fiber-reinforced polymer wood beams. Maine Agricultural and Forest Experiment Station. University of Maine. Bulletin 848. June 2000: 42.
4. Rowlands RE, Deweghe RP, Laufenberg TL and Krueger GP. Fiber-reinforced wood composites. Wood and Fiber Science, 1986; 18(1): 39 – 57.
5. Heiduschke A and Haller P. Load-carrying behavior of fiber reinforced wood profiles. World Conference on Timber Engineering, 2010: 7.
6. Cabrero JM, Heiduschke A and Haller P. Parametric analysis of composite reinforced wood tubes under axial compression. World Conference on Timber Engineering, 2010: 20 – 24.
7. Windorski DF, Doltis LA and Ross RJ. Feasibility of fiberglass-reinforced bolted wood connections. Res. Pap. FPL–RP–562: Madison: WI: U.S. Department of Agriculture. Forest Service. Forest Products Laboratory 1997: 9.
8. Norvydas V, Juodeikiene I and Minelga D. The influence of glued dowel joints construction on the bending moment resistance. Materials Science, 2005; 11(1): 36 – 39.
9. Liu WQ and Eckelman CA. Effect of number of fasteners on the strength of corner joints for cases. Forest Product Journal, 1998; 48(1): 93 – 95.
10. Tankut AN and Tankut N. Evaluation the effects of edge banding type and thickness on the strength of corner joints in case-type furniture. Materials and Design, 2010; 31: 2956 – 2963.
11. Yerlikaya NC and Aktas A. Enhancement of load-carrying capacity of corner joints in case-type furniture. Materials and Design, 2012; 37: 393 – 401.
12. Yerlikaya NC. Effects of glass-fiber composite, dowel, and minifix fasteners on the failure load of corner joints in particleboard case-type furniture. Materials and Design, 2012; 39: 63 – 71.
13. ASTM D 1037. Evaluating the properties of wood-base fiber and particle panel materials. ASTM, 1973.
14. Aktas A. Statistical analysis of bearing strength of glass-fiber composite materials. Journal of Reinforced Plastics and Composites, 2007; 26: 555 – 564.
Thank you for copying data from http://www.arastirmax.com