Buradasınız

Anasayfa » Content

KESİCİ TAKIMLARIN AŞINMASINI GÖZLEMLEME ÜZERİNE YAPILAN ÇALIŞMALAR

STUDIES ON TOOL WEAR CONDITION MONITORING

Journal Name:

  • Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi

Publication Year:

  • 2001

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
In this study, wear mechanisms on cutting tools, especially for the drill bits, during the cutting operation have been investigated. As the importance of full automation in industry has gained substantial importance, tool wear condition monitoring during the cutting operation has been the subject of many investigators. Tool condition monitoring is very crucial in order to change the tool before breakage. Because tool breakage can cause considerable economical damage to both the machine tool and workpiece. In this paper, the studies on the monitoring of drill bit wear in literature have been introduced; the direct/indirect techniques used and sensor fusion techniques have been summarized. The methods which were proposed to determine tool wear evolution as processing the sensor signals collected have been provided and their references have been given for detailed information.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışmada, kesici takımlardaki ve özellikle matkap ucunda kesme işlemi sırasında meydana gelen aşınma mekanizmaları üzerinde durulmuştur. Endüstride tam otomasyonun öneminin artmasıyla birlikte kesme işlemi sırasında takım durumunu gözlemlemek bir çok araştırmacının üzerinde çalıştığı bir konu olmuştur. Aşınmanın gözlemlenmesi kesici takımın kırılmadan değiştirilmesi bağlamında çok önemlidir. Çünkü kesici takımın kırılması gerek çalıştığı tezgaha gerekse iş parçasına ekonomik açıdan büyük zarara yol açmaktadır. Bu makalede, literatürde matkap ucunun aşınmasının gözlenmesi üzerine yapılan çalışmalar tanıtılmış; kullanılan direkt ve indirekt ölçme teknikleri ile sensör füzyonu konusundaki çalışmalar özetlenmiştir. Toplanan sensör sinyallerinin işlenerek kesici takımın aşınma safhasını belirlemek için önerilen metotlar sıralanmış ve daha ayrıntılı bilgi için referansları verilmiştir.
FULL TEXT (PDF): 
PDF icon arastirmax-kesici-takimlarin-asinmasini-gozlemleme-uzerine-yapilan-calismalar.pdf
  • 1
55
62
  • Turkish

REFERENCES

References: 

Armarego, E.
J
. A., and Brown, R. H. 1969. The Machining of Metals, Prentice Hall Inc.
Cuppini, D., D'errico, G. and Rutelli, G.
1990
. "Tool Wear Monitoring Based on Cutting Power Measurement", Wear, Vol. 139, pp. 303-311.
Danai, K. and Ulsoy, A. G. 1988. "Dynamic Modeling of Cutting Forces in Turning, Milling and Drilling, From Experimental Data", Control Methods for Manufacturing Processes, Vol. 9,
pp. 27-34.
Dimla, D. E., Lister, P. M. and Leighton, N. J. 1997. "Neural Network Solutions to the Tool Condition Monitoring Problem in Metal Cuting - a critical Review of Methods", International Journal of Machine Tools Nad Manufacturing, Vol. 37, pp. 1219-1241.
Dornfeld, A. D., and DeVeries, M. F. 1992. "Drill Wear and Fracture Monitoring in Drilling Using Acoustic Emission", CIRP STC, C' Meeting, Paris.
El-Wardany, T. I., Gao, D. and Elbestawi, M. A.
1996. "Tool Condition Monitoring in Drilling Using Vibration Signature Analysis", International Journal of Machine Tools and Manufacturing, Vol. 36, pp.
687-711.
Ertunç,
H
. M. 1999. "Techniques for Tool Wear Condition Monitoring in Drilling Operations", PhD Thesis, Case Western Reserve University, USA.
Furness, R. J., Wu, C. L., and Ulsoy, A. G. 1992.
"Statistical Analysis of the Effects of feed, Speed, and Wear on Hole Quality in Drilling", Sensors and Signal Processing for Manufacturing, Vol. 55, pp.
97-112.
Halamoğlu, T. 1998. "Metal Püskürtme Yöntemiyle Aşınmaya Dayanıklı Kaplamalar", Yüzey İşlemleri Dergisi, Eylül-Ekim, ss. 154.
Hong, S. Y. 1993. "Knowledge-Based Diagnosis of Drill Conditions", Journal of Intelligent Manufacturing, Vol. 4, pp. 233-241.
Hummel P. M. and Lang, G. L. 1997. "Measurement of Temperature on Diamond-Coated Tools During Machining Process", Diamond Films and
Technology, Vol. 7, pp. 219-232.
Isermann, R., Ayoubi, M., Konrad, H., Reib, T. 1993. "Model Based Detection of Tool Wear and Breakage for Machine Tools", Proc IEEE, Int. Conf.
Syst. Man Cybern, Vol. 3, pp. 72-77.
Iwata, K., and Moriwaki, T. 1977. "An Application of Acoustic Emission to in-Process Sensing of Tool
Wear", Ann. CIRP, Vol. 26, pp. 21-26.
Kanai, M. and Kanda, Y. 1988. "Statistical Characteristics of Drill wear and Drill life for the Standardized Performance Tests", CIRP Annual, pp.
61-66.
Kawaji, S. and Sasaoka, T. 1995. "Control of Cuting Torque in the Drilling Process Using Disturbance Observer", American Control Conference, Seatle, Washington, pp.723-728.
Kurada, S.
an
d Bradley, C. 1997. "A Review of Machine Vision Sensors for Tool Condition Monitoring", Computers in Industry, Vol. 34, pp.
55-72.
Lee, D. K., Choi, C. N. and Chu, J. M. 1994. "Real¬Time tool Breakage Monitoring for NC Turning and
Drilling", Annals of the CIRP, Vol. 43, pp. 81-84.
Li, G. S., Lau, W. S. and Zhang, Y. Z. 1992. "In-Process Drill Wear and Breakage Monitoring for a Machining Centre Based on Cutting Force Parameters", Int. J. Machine Tools and Manufacturing, Vol.31(6), pp. 855-867.
Lin, S. C. and Ting, C. J. 1995. "Tool Wear Monitoring in Driliing Using Force Signals", Wear,
Vol. 180, pp. 53-60.
Liu, T. I. and Anantharaman, K. S. 1994. "Intelligent Classification and Measurement of Drill Wear", Journal of Engineering for Industry, pp. 392-397.
Liu, T. I. and Wu, S. M. 1990. "On-line Detction of Tool Wear", Journal of Engineering in Industry, Vol. 112, pp. 299-302.
Mauch, C. A. and Lauderbaugh, L. K. 1990.
"Modeling the Drilling Process - an Analytical
Mühendislik
Bilimler
i Dergisi 2001 7 (1) 55-62
61
Journal of Engineering Sciences 2001 7 (1) 55-62
Kesici Takımların Aşınmasını Gözlemleme Üzerine Yapılan Çalışmalar, H. M. Ertunç, İ. Sevim
Model to Predict Thrust Force and Torque", Computer Modeling and Simulation of Manufacturing Process, ASME Production Division,
Vol. 48, pp. 59-65.
Motovalli, S. and Bahr, B. 1993. "Automated Tool Monitoring System using Vision System for a Robotic cell", Robotics and Computer Integrated Manufacturing, V. 10, pp. 311-319.
Pan, H., Chen, Y. and Orady, E. 1996. "Monitoring
Methods of Tool Wear in a Drilling Process", 2nd Industrial Engineering Research Conference Proceedings, pp. 380-383.
Pletting, J. 1998. "Superior Tooling Builds Outstanding Workmanship"., www.pletting.com
Smith, G. T. 1989. Advanced Machining, The Handbook of Cutting Technology, Springer, Berlin.
Subramanian, K. and Cook, N. H. 1977. "Sensing of Drill Wear and Prediction of Drill life" ASME, Journal of Engineering for Industry, Vol. 99, pp.
295-301.
Wright, P. K. 1983. "Physical Models of Tool Wear
for Adaptive Control in Flexible Machining Cells", Computer Integrated Manufacturing, Vol. 8,
pp. 19-31.

Thank you for copying data from http://www.arastirmax.com