A METHOD ABOUT THE ARTIFACT DESIGN FOR INDOOR SURFACE: SILICONE MOLD TECHNOLOGY
Journal Name:
- Mugla Journal of Science and Technology
Keywords (Original Language):
| Author Name | University of Author | Faculty of Author |
|---|---|---|
Abstract (2. Language):
It is possible to say that the structures, which materials are used with nominative in today’s technology, repeat themselves in variety of structure. Concrete mass which are exposed the holes of bolt mold, metal surfaces which are protected of view oxidized, wood plaques impregnated for avoid only the conditions of outdoor are frequently used in architecture, either indoor or outdoor, due to their natural appearances.
The designers, who adopted the approach of using materials in their natural states, tend to make difference in about structures in this repetition and try several technics. Approaches of usage by giving texture or forming pattern to surfaces of materials of concrete, plaster, etc., which are used pouring into molds pre-prepared, can give an example for those technics.
It’s necessary to shear or contuse the certain regions of concrete surface to create pattern and texture on concrete out of the mold, and these operations create loss of time and energy in implementation process.
Another method of forming pattern and texture on concrete surface is to use the special-designed molds in casting process. It is taken a mold by forming model with the materials like clay, mud, plastilin, which can be shaped easily and pouring concrete to these molds, intended texture on the surface of concrete out of the mold is obtained.
In this study, different methods about the forming texture on the surface of concrete are obtained, starting from the traditional molding stage to silicone mold technology. Production method and process of texture, which are become different from standard operations and can be premeditated for the texture obtained are examined with positive and negative sides as main subject of the study.
Bookmark/Search this post with
Abstract (Original Language):
Günümüz teknolojisinde malzemelerin yalın haliyle kullanıldığı yapıların, yapı çeşitliliği içerisinde kendilerini tekrarladığını söylemek mümkündür. Kalıp cıvata deliklerinin açıkta bırakıldığı beton kütleler, oksitlenmiş görünümünün korunduğu metal yüzeyler, yalnızca dış ortam şartlarından korunmak üzere emprenye edilmiş ahşap plakalar, doğal görünümleri nedeniyle mimari yapılarda gerek iç mekân gerekse dış cephelerde sıklıkla kullanılmaktadır.
Malzemeleri doğal halleriyle kullanma yaklaşımını benimsemiş tasarımcılar, bu tekrarın içindeki yapılarında farklılık yaratmaya yönelmekte ve çeşitli teknikler denemektedirler. Önceden hazırlanan kalıplara dökülerek kullanılan beton, alçı vb. malzemelerin yüzeylerine doku verilerek veya desen oluşturarak kullanma yaklaşımları bu tekniklere örnek verilebilir.
Kalıptan çıkmış betonda desen ve doku oluşturabilmek için beton yüzeyinin belirli bölgelerini tıraşlamak veya zedelemek gerekmekte, bu işlemler ise uygulama sürecinde enerji ve zaman kayıpları oluşturmaktadır.
Beton yüzeyinde desen ve doku oluşturmanın bir başka yöntemi ise özel olarak tasarlanan kalıpların döküm sürecinde kullanılmasıdır. Kil, çamur, plastelin gibi kolay şekillenebilen malzemelerle model oluşturarak kalıp alınmakta ve beton bu kalıplara dökülerek, kalıptan çıkan beton yüzeyinde istenilen doku elde edilmektedir.
Bu çalışmada, beton yüzeyinde doku oluşturmadaki farklı yöntemler geleneksel kalıplama evresinden başlayarak silikon kalıp teknolojisine kadar ele alınmıştır. Standart uygulamalardan farklılaşan ve elde edilmek istenen dokunun önceden tasarlanabildiği bu üretim yöntemi ve süreci, çalışmanın ana konusu olarak olumlu ve olumsuz yönleri ile incelenmiştir.
FULL TEXT (PDF):
- 2