[1] Y. Zhang, Y. Liu, Y. Shen, R. Ji, Z. Li, C. Zheng, Investigation on the influence of the
dielectrics on the material removal characteristics of EDM, Journal of Materials Processing
Technology, Vol. 214, Issue 5, pp. 1052-1061, 2014.
[2] B. Ndaliman, M., A. Khan, A., Y. Ali, M., A. M. Hambiyah, M., "Modeling the surface
roughness behavior of an EDMed workpiece with different tool electrodes using DOE",
IOP Conferences Series: Materials Science and Engineering, Vol. 53, Issue 1, 2013.
[3] M. K. Das, K. Kumar, T. K. Barman, P. Sahoo, Optimization of surface roughness and
MRR in EDM using WPCA, Procedia Engineering, Vol. 64, pp. 446-455, 2013.
[4] T. Vijayashakthivel, T. N. S. Dath, R. Krishnamurthy, Response of copper to equal channel
angular pressing with different processing temperature, Procedia Engineering, Vol. 97, pp.
56-63, 2014.
[5] K. O. Sanusi, O. D. Makinde, G. J. Oliver, Equal channel angular pressing technique for
the formation of ultra-fine grained structures, South African Journal of Science, Vol. 108,
No. 9-10, 2012.
[6] E. Zeynali, H. Bisadi, Comparing plastic deformations produced by HPT and ECAP
processes using the finite element analysis method, International Journal of Mechanics and
Applications, Vol. 2(1), pp. 20-24, 2012.
[7] K. O. Sanusi, G. J. Oliver, Effects of grain size on mechanical properties of nanostructured
copper alloy by severe plastic deformation (SPD) process, Journal of Engineering/Design
and Technology, Vol. 7, No. 3, pp. 335-341, 2009.
[8] Sh. R. Bahadori, K. Dehghani, F. Bakhshandeh, Microstructure, texture and mechanical
properties of pure copper processed by ECAP and subsequent cold rolling, Materials
Science & Engineering A, Vol. 583, pp. 36-42, 2013.
[9] B. Tolaminejad, K. Dehghani, Microstructural characterization and mechanical properties
of nanostructured AA1070 aluminum after equal channel angular extrusion, Materials and
Design, Vol. 34, PP. 285-292, 2012.
[10] M. Greger, J. Valicek, P. Hlavacek, Microstructure and hardness of copper after pressing
by ECAP, in 13th International Research/Expert Conference, Trends in the Development
of Machinery and Associated Technology, Hammamet, Tunisia, pp. 749-752, 2009.
[11] F. A. Matoofi, Copper Heat Treatment And Its Alloy Standards, Tehran: Fadak Isatis,
2006.(In Persian)
[12] Keskin, Y., S. Halkaci, H., Kizil, M., "An experiment study for determination of the effects
of machining parameters on surface roughness in electrical discharge machining", The
International Journal of Advanced Manufacturing Technology, Vol. 28, Issue 11-12, pp.
1118-1121, 2006.
[13] k. Das, M., Kumar, K., k. Barman, T., Sahoo, P., "Optimization of surface roughness and
MRR in EDM using WPCA", Procedia Engineering, Vol. 64, pp. 446-455, 2013.
[14] F. Al-Mufadi, F. Djavanroodi, Effect of equal channel angular pressing process on impact
property of pure copper, International Journal of Chemical/Nuclear/Materials and
Metallurgical Engineering, Vol. 8, No. 1, 2014.
Thank you for copying data from http://www.arastirmax.com