[1] Papadopoulos, Moschos A., ed. Orthodontic treatment of the Class II noncompliant patient: Current principles
and techniques. Elsevier Health Sciences, 2006.
[2] Roberts-Harry, D., and J. Sandy. “Orthodontics. Part 9: Anchorage control and distal movement.” British Dental
Journal, Vol. 196, No. 5, 2004, pp. 255-63.
[3] Bumann, A., K. Wiemer, and J. Mah. “Tomas-eine praxisgerechte Lösung zur temporären kieferorthopädischen
Verankerung.” Kieferorthop, Vol. 20, No. 3, 2006, pp. 223-32.
[4] Papadopoulos, Moschos A., and Fadi Tarawneh. “The use of miniscrew implants for temporary skeletal anchorage
in orthodontics: A comprehensive review.” Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and
Endodontology, Vol. 103, No. 5, 2007, pp. e6-e15.
[5] Nienkemper, Manuel, et al. “Measurement of mini-implant stability using resonance frequency analysis.” The
Angle Orthodontist, Vol. 83, No. 2, 2012, pp. 230-38.
[6] Son, Seil, et al. “Comparative study of the primary stability of self-drilling and self-tapping orthodontic
miniscrews.” American Journal of Orthodontics and Dentofacial Orthopedics, Vol. 145, No. 4, 2014, pp. 480-85.
[7] Hung, Emily, et al. “Effects of pilot hole size and bone density on miniscrew implants’ stability.” Clinical Implant
Dentistry and Related Research, Vol. 14, No. 3, 2012, pp. 454-60.
[8] Kim, Jung Suk, et al. “Comparison of success rates of orthodontic mini-screws by the insertion method.” The
Korean Journal of Orthodontics, Vol. 42, No. 5, 2012, pp. 242-48.
[9] Cousley, Richard. “Mini-implants in orthodontics. Innovative anchorage concepts (2008).” 2009, pp. 215-16.
[10] Kim, Jong-Wan, Sug-Joon Ahn, and Young-Il Chang. “Histomorphometric and mechanical analyses of the drillfree
screw as orthodontic anchorage.” American Journal of Orthodontics and Dentofacial Orthopedics, Vol. 128,
No. 2, 2005, pp. 190-94.
[11] Friberg, B., et al. “Evaluation of bone density using cutting resistance measurements and microradiography. An
in vitro study in pig ribs.” Clinical Oral Implants Research, Vol. 6, No. 3, 1995, pp. 164-71.
Mohammed, et al. Int J Med Res Health Sci 2018, 7(1): 128-134
133
[12] Kido, Hirofumi, et al. “Implant diameter and bone density: Effect on initial stability and pull-out resistance.” The
Journal of Oral Implantology, Vol. 23, No. 4, 1997, pp. 163-69.
[13] Cheng, Shih-Jung, et al. “A prospective study of the risk factors associated with failure of mini-implants used for
orthodontic anchorage.” International Journal of Oral & Maxillofacial Implants, Vol. 19, No. 1, 2004.
[14] Huja, S.S., et al. “Biomechanical and histomorphometric analyses of monocortical screws at placement and 6
weeks postinsertion.” Journal of Oral Implantology, Vol. 32, No. 3, 2006, pp. 110-16.
[15] Sakoh, Jun, et al. “Primary stability of a conical implant and a hybrid, cylindric screw-type implant in
vitro.” International Journal of Oral & Maxillofacial Implants, Vol. 21, No. 4, 2006.
[16] Tseng, Yu-Chuan, et al. “Effect of anchor length on the pullout strength of palatal mini implants.” Implant
Dentistry, Vol. 26, No. 4, 2017, pp. 553-58.
[17] Lim, Seon-A., Jung-Yul Cha, and Chung-Ju Hwang. “Insertion torque of orthodontic miniscrews according to
changes in shape, diameter and length.” The Angle Orthodontist, Vol. 78, No. 2, 2008, pp. 234-40.
[18] Holm, Lindsy, et al. “An in vitro study of factors affecting the primary stability of orthodontic mini-implants.” The
Angle Orthodontist, Vol. 82, No. 6, 2012, pp. 1022-28.
[19] Hosein, Yara K., et al. “A comparison of the mechanical measures used for assessing orthodontic mini-implant
stability.” Implant Dentistry, Vol. 26, No. 2, 2017, pp. 225-31.
[20] Devlin, H., K. Horner, and D. Ledgerton. “A comparison of maxillary and mandibular bone mineral densities.” The
Journal of Prosthetic Dentistry, Vol. 79, No. 3, 1998, pp. 323-27.
[21] Misch, Carl E. Contemporary Implant Dentistry-E-Book. Elsevier Health Sciences, 2007.
[22] Miyajima, Kuniaki, et al. “Three-dimensional finite element models and animal studies of the use of mini-screws
for orthodontic anchorage.” Craniofacial Growth Series, Vol. 42, 2005, p. 269.
[23] Tabassum, Afsheen, et al. “Influence of surgical technique and surface roughness on the primary stability
of an implant in artificial bone with different cortical thickness: A laboratory study.” Clinical Oral Implants
Research, Vol. 21, No. 2, 2010, pp. 213-20.
[24] Mattos, Cláudia Trindade, Antônio Carlos de Oliveira Ruellas, and Carlos Nelson Elias. “Is it possible to re-use
mini-implants for orthodontic anchorage? Results of an in vitro study.” Materials Research, Vol. 13, No. 4, 2010,
pp. 521-25.
[25] Pithon, Matheus Melo, Daniel Santos Fonseca Figueiredo, and Dauro Douglas Oliveira. “Mechanical evaluation
of orthodontic mini-implants of different lengths.” Journal of Oral and Maxillofacial Surgery, Vol. 71, No. 3,
2013, pp. 479-86.
[26] Marquezan, Mariana, et al. “Does cortical thickness influence the primary stability of miniscrews? A systematic
review and meta-analysis.” The Angle Orthodontist, Vol. 84, No. 6, 2014, pp. 1093-1103.
[27] Florvaag, Britta, et al. “Biomechanical properties of orthodontic miniscrews. An in-vitro study.” Journal of
Orofacial Orthopedics/Fortschritte der Kieferorthopädie, Vol. 71, No. 1, 2010, pp. 53-67.
[28] Nienkemper, Manuel, et al. “Orthodontic mini-implant stability at different insertion depths.” Journal of
Orofacial Orthopedics/Fortschritte der Kieferorthopädie, Vol. 77, No. 4, 2016, pp. 296-303.
[29] Pithon, Matheus Melo, Matilde Gonçalves Nojima, and Lincoln Issamu Nojima. “Primary stability of orthodontic
mini-implants inserted into maxilla and mandible of swine.” Oral surgery, Oral Medicine, Oral Pathology and
Oral Radiology, Vol. 113, No. 6, 2012, pp. 748-54.
[30] Migliorati, Marco, et al. “Orthodontic miniscrews: An experimental campaign on primary stability and bone
properties.” European Journal of Orthodontics, Vol. 37, No. 5, 2014, pp. 531-38.
[31] Oliscovicz, Nathalia Ferraz, et al. “Analysis of primary stability of dental implants inserted in different substrates
using the pullout test and insertion torque.” International Journal of Dentistry, Vol. 2013, 2013.
[32] Lee, Jong Suk. Applications of Orthodontic Mini Implants. Quintessence Publishing Company, 2007.
[33] Roberts, W. E. “Bone dynamics of osseointegration, ankylosis, and tooth movement.” Journal (Indiana Dental
Association), Vol. 78, No. 3, 1999, pp. 24-32.
Mohammed, et al. Int J Med Res Health Sci 2018, 7(1): 128-134
134
[34] Cha, Jung-Yul, et al. “Miniscrew stability evaluated with computerized tomography scanning.” American
Journal of Orthodontics and Dentofacial Orthopedics, Vol. 137, No. 1, 2010, pp. 73-79.
[35] Huja, Sarandeep S., et al. “Pull-out strength of monocortical screws placed in the maxillae and mandibles of
dogs.” American Journal of Orthodontics and Dentofacial Orthopedics, Vol. 127, No. 3, 2005, pp. 307-13.
[36] Ono, A., M. Motoyoshi, and N. Shimizu. “Cortical bone thickness in the buccal posterior region for orthodontic
mini-implants.” International Journal of Oral and Maxillofacial Surgery, Vol. 37, No. 4, 2008, pp. 334-40.
[37] Momin, M.A., T. Kurabayashi, and T. Yosue. “Quantitative and morphological evaluation of cancellous and
cortical bone of the mandible by CT.” OMICS Journal of Radiology, Vol. 3, No. 155, 2013, p. 2.
[38] Laursen, Morten G., Birte Melsen, and Paolo M. Cattaneo. “An evaluation of insertion sites for mini-implants: a
micro-CT study of human autopsy material.” The Angle Orthodontist, Vol. 83, No. 2, 2012, pp. 222-29.
[39] Chang, Jenny Zwei-Chieng, et al. “Effects of thread depth, taper shape, and taper length on the mechanical
properties of mini-implants.” American Journal of Orthodontics and Dentofacial Orthopedics, Vol. 141, No. 3,
2012, pp. 279-88.
[40] Shah, Ankit H., et al. “Effects of screw and host factors on insertion torque and pullout strength.” The Angle
Orthodontist, Vol. 82, No. 4, 2011, pp. 603-10.
[41] Hitchon, Patrick W., et al. “Factors affecting the pullout strength of self-drilling and self-tapping anterior cervical
screws.” Spine, Vol. 28, No. 1, 2003, pp. 9-13.
[42] Park, Hyo-Sang, Seong-Hwa Jeong, and Oh-Won Kwon. “Factors affecting the clinical success of screw implants
used as orthodontic anchorage.” American Journal of Orthodontics and Dentofacial Orthopedics, Vol. 130, No.
1, 2006, pp. 18-25.
[43] Wu, Tzu-Ying, Shou-Hsin Kuang, and Cheng-Hsien Wu. “Factors associated with the stability of mini-implants
for orthodontic anchorage: A study of 414 samples in Taiwan.” Journal of Oral and Maxillofacial Surgery, Vol.
67, No. 8, 2009, pp. 1595-99.
[44] Holmgren, Eric P., et al. “Evaluating parameters of osseointegrated dental implants using finite element
analysis-a two-dimensional comparative study examining the effects of implant diameter, implant shape, and
load direction.” Journal of Oral Implantology, Vol. 24, No. 2, 1998, pp. 80-88.
[45] Miyawaki, Shouichi, et al. “Factors associated with the stability of titanium screws placed in the posterior region
for orthodontic anchorage.” American Journal of Orthodontics and Dentofacial Orthopedics, Vol. 124, No. 4,
2003, pp. 373-78.
[46] Walter, André, et al. “Design characteristics, primary stability and risk of fracture of orthodontic mini-implants:
Pilot scan electron microscope and mechanical studies.” Medicina Oral, Patologia Oral Y Cirugia Bucal, Vol.
18, No. 5, 2013, p. e804.
[47] Tseng, Yu-Chuan, et al. “Evaluation of mechanical strengths of three types of mini-implants in artificial
bones.” The Kaohsiung Journal of Medical Sciences, Vol. 33, No. 2, 2017, pp. 96-101.
[48] Kuroda, Shingo, et al. “Clinical use of miniscrew implants as orthodontic anchorage: success rates and
postoperative discomfort.” American Journal of Orthodontics and Dentofacial Orthopedics, Vol. 131, No. 1,
2007, pp. 9-15.
[49] Hong, Christine, et al. “Stability comparison between commercially available mini-implants and a novel design:
part 1.” The Angle orthodontist, Vol. 81, No. 4, 2011, pp. 692-99.
[50] Yu, Jian-Hong, et al. “Mechanical effects of micro-thread orthodontic mini-screw design on artificial cortical
bone.” Journal of Medical and Biological Engineering, Vol. 34, No. 1, 2014, pp. 49-55.
[51] Wang, Chau-Hsiang, et al. “Mechanical strength of orthodontic infrazygomatic mini-implants.” Odontology, Vol.
99, No. 1, 2011, pp. 98-100.
[52] Assunção, Viviane A., et al. “Insertion torque and pull-out strength of orthodontic mini-implants comparing
manual and motor insertion methods.” Journal of Craniofacial Surgery, Vol. 26, No. 3, 2015, pp. 993-96.
Thank you for copying data from http://www.arastirmax.com