A COMPARISON OF VARIOUS POST-CORE ALTERNATIVES FOR ENDODONTICALLY TREATED ANTERIOR TEETH
Journal Name:
- Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi
Keywords (Original Language):
Author Name | University of Author | Faculty of Author |
---|---|---|
Abstract (2. Language):
This study attempted to investigate the most suitable post-core for the restoration of the central teeth without crown by using mechanical stress analysis and finite element methods.
Cana]
pos
t [radix anchor) , dentine pins and coronal radicular techniques were used for the restoration of the samples of roots of central teeth. These samples were resLored alternately by silver amalgam, light cured composite and conventional glass ionomer.
57 central teeth were chosen teeth were chosen for mechanical stress analysis. The samples were randomly divided into three groups to be studied by three different techmquess and each group were divided into three subgroups for restoration with the restorative material mentioned above. Samples taken from 9 subgroups were embedded into acrylic block down to 1 mm level of cole. The samples were tested by instron machine in order to determine their ability for resistance against pressure. The statistical values obtained from the results of the mechanical stress analysis showed that the denline pin proved to be the most suitable cavity alternative and the composite appeared to be more resistant material than others, whereas eorona-radicufar technique was found to be the weakest cavity alternative and glass ionomer to be the poorest restorative material.
Bookmark/Search this post with
Abstract (Original Language):
Çalışmamada, kuron kısmı bulunmayan sanıra! dişlerin restorasyonu için cn uygun post-core alternatifi, mekanik stres analizi ve sonlu elemanlar metodu kullanılarak araştırılmıştır.
Santral diş köklerinden oluşan örneklere, kanal pim (kök arikeri), dentin pini Ve korOno-radikular lekniği uygulanmıştır. Ayrıca bu örnekler, amalgam, ışıkla sertleşen kompozit ve geleneksel cam iyonomerle restore edilmiştir.
Mekanik stres analizi için 57 adet santral diş temin edilmiştir. Dişler kanal pini, denlin pini vç korono-radikular teknik için üç ana gruba bölünmüştür. Bu gruplar, yukarıda belirtilen üç dolgu maddesiyle restore edilmek üzere, kendi içinde üç alt gruba ayrılarak 9 deney grubu elde edilmiş ve herbir örnek, köle seviyesinin 1 mm altına kadar akrile gömülmüştür. Örneklere instron test makinası yardımıyla kuvvet uygulanmış ve kırılma değerleri elde edilmiştir.
Mekanik stres analizi sonucunda elde edilen istatistik! değerler, kavite altamatifi olarak dentin pinli, restoratif materyal olarak da kompozitin diğerlerinden daha dayanıklı olduğunu ortaya çıkarmıştır. En dayanaksız kavite şeklinin koron a-radik ular teknik, restoratif materyalin ise cam iyonomer olduğu tespit edilmişti
FULL TEXT (PDF):
- 2
58-65