You are here

Home » Content

THE EFFECT OF COUNT, TWIST, OPENING ROLLER SPEED AND ROTOR SPEED ON YARN TENSILE PROPERTIES OF ROTOR SPUN YARNS

Journal Name:

  • International Journal of Engineering & Applied Sciences

Publication Year:

  • 2017

Key Words:

Author NameFaculty of Author
Abstract (2. Language): 
Tensile properties are some of the important parameters when considering the quality of rotor spun yarns. This research work set out to investigating the effect of four factors namely count, twist, opening roller speed and rotor speed on the tensile properties of rotor spun yarn. Taguchi Experimental Design was used to study the influence of the four factors on yarn tensile (strength and elongation) properties. The experiments were carried out in a textile factory in Uganda. The results obtained in this research work indicated that both single and combined effects of the selected factors significantly affected yarn strength and elongation. For the given cotton lint, optimum tensile properties could be obtained at15Ne, 5TM, 8000 rpm and 90,0000 rpm for count, twist, opening roller speed and rotor speed respectively.
Bookmark/Search this post with
FULL TEXT (PDF): 
PDF icon arastirmax-effect-count-twist-opening-roller-speed-and-rotor-speed-yarn-tensile-properties-rotor-spun-yarns.pdf
  • 1
33
42
  • English

REFERENCES

References: 

[1] Salhotra, KR. “An Overview of Spinning Technologies: Possibilities, Applications and
Limitations.” Indian Journal of Fibre and Textile Research, 17, no. 4(1992): 255-262.
[2] Lord, PR. Handbook of yarn production Technology, Science and Economics. New York
Washington, DC: Woodhead Publishing Ltd, 2003.
[3] Arain, Farooq Ahmed, Tanwari, Anwaruddin, Hussain, Tanveer, Malik, Zulfiqar Ali.
“Multiple response optimization of rotor yarn for strength, unevenness, hairiness and
imperfections”. Fibers and Polymers, 13, no.1 (2012): 118-122.
[4] Lawrence A. Carl. Fundamentals of Spun Yarn Technology. Boca Raton London New
York Washington, D.C. CRC Press LLC, 2003.
[5] Gnanasekar K, Chellamani P., Karthikeyan S. “Influence of rotor speed in open-end
spinning on yarn quality”, Indian Journal of fibre & Textile Research, 15, no. 4
(1990):164-168.
[6] Furter Richard. “Physical Properties of Spun Yarns”. Uster Technology Application
report, 2, no. 36 (2009): 23-24
[7] Khalilur Rahman Khan, Habibur Rahman, Khalilur RK, Habibur R. “Study of Effect of
Rotor Speed, Combing-Roll Speed and Type of Recycled Waste on Rotor Yarn Quality
Using Response Surface Methodology”. Journal of Polymer and Textile Engineering, 2,
no. (2015): 47-55.
[8] Ahmed F, Saleemi S, Rajput AW, Shaikh IA, Sahito AR. “Characterization of Rotor Spun
Knitting Yarn at High Rotor Speeds”. Technical Journal, University of Engineering and
Technology (UET) Taxila, Pakistan, 19, no. 4 (2014) :73-78.
[9] Manohar JS, Rakshit AK, Balasubramanian N. “Influence of Rotor Speed, Rotor
Diameter, and Carding Conditions on Yarn Quality in Open-End Spinning”. Textile
Research Journal, 53, no. 8 (1983):497-503.
[10] Apurba Das, Saiyed Muzaffar Ishtiaque. “End Breakage In Rotor Spinning: Effect of
Different Variables on Cotton Yarn End Breakage”. Autex Research Journal, 4, no. 2
(2004): 52-59.
[11] Soliman HA, Hellwig AH. “Influence of Combing on Open-End Rotor Spinning
Parameters.” International Textile Bulletin, Yarn and Fabric Forming, 2, (1996): 39-44.

Thank you for copying data from http://www.arastirmax.com