You are here

Effect of the Dip-coating Speed on the Structural and Optical Properties of ZnO Thin Films

Journal Name:

Publication Year:

Abstract (2. Language): 
In the present paper we have study the structural and optical properties of the ZnO thin films deposited on glass substrates, we have used the dip-coating method with the Sol-Gel technique. The effect of dip-coating speeds on the transparency and structural quality of ZnO films have been studied in a crystallization temperature between 550-600 °C. We revealed that highly c-axis oriented ZnO thin films were obtained at 600 °C and immerse speed is ( v = 2.17 cm/min) in this condition where the films high quality of deposition as the direction (002) peak along c-axis orientation and the grain size increases with optical gap energy increased.
28-31

REFERENCES

References: 

[1] D.C. Hyung, J.K. Hong, B.M. Moo, Y.J. Deuk, Applied Surface Science
255 (2009) 3480–3484.
[2] D. Djouadi, A. Chelouche, A. Aksas, M. Sebais, Physics Procedia 2
(2009) 701-705.
[3] L. Jin, F. Huiqing, C. Xiaopeng, C. Zhiyi, Colloids and Surfaces A:
Physicochem. Eng. Aspects 349 (2009) 202–206.
[4] K. Takahashi, Wide Bandgap Semiconductors Chairman of the 162
Committee, JSPS,Tokyo 2005.
[5] Y.A. Kalandaragh, A. Khodayari , M. Behboudnia, Materials Science in
Semiconductor Processing 12 (2009) 142–145.
[6] H. Norbert. Nickel and Evgenii Terukov, Zin Oxide A Material for
Micro- and Optoelectronic Applications Series II: Mathematics, Physics
and Chemistry Vol. 194, russia 2004.
[7] H. Ruijiang, X. Shuhua, J. Mater. Sci. Technol, 26(2010) 872-877.
[8] M. G. Nair, M. Nirmala, K. Rekha, A. Anukaliani, Materials Letters 65
(2011) 1797–1800.
[9] Manjula G. Nair, M. Nirmala, K. Rekha, A. Anukaliani, Mats Letters 65
(2011) 1797–1800.
[10] S.S. Barkade, J.B. Naik, S.H. Sonawane, Colloids and Surfaces A
Physicochem. Eng. Aspects 378 (2011) 94–98.
[11] A. K. K. Kyaw, X. W. Sun, C. Y. Jiang, J Sol-Gel Sci Technol 52
(2009) 348–355.
[12] G. Babita, J. Anubha, R.M. Mehra, J. Mater. Sci. Technol., 2010, 26(3)
223-227.
[13] Y. T. Yin, W. X. Que, C. H. Kam, J Sol-Gel Sci Technol 53 (2010)
605–612.
[14] C.E. Benouis, M. Benhaliliba, A.S. Juarez and M.S. Aida, F. Chamid, F.
Yakuphanoglu, Journal of Alloys and Compounds 490 (2010) 62–67.
[15] V. Musat, B. Teixeira, E. Fortunato, R.C.C. Monteiro, P. Vilarinho,
Surface and Coatings Technology 180 –181 (2004) 659–662
[16] N. Rabrahm, I. Dekany, Colloids and Surfaces A: Physicoch. Eng.
Aspects 364 (2010) 26–33.
[17] E. Pal, I. Dekany, Colloids and Surfaces A: Physicochem. Eng. Aspects
318 (2008) 141–150.
[18] S. Singhal. A.K. Chawla. H.O. Gupta, R. Chandra, Nanoscale Res Lett
5 (2010) 323–330.
[19] W. Buguo, M.J. Callahan, X.U. Chunchuan, L.O. Bouthillette, N.C.
Giles, D.F. Bliss, Journal of Crystal Growth 304 (2007) 73–79.
[20] S. J. Kang, Y.H. Joung, H.H. Shin, Y.S. Yoon, J Mater Sci: Mater Electr
19 (2008) 1073–1078.
[21] L. Castaneda, A.G. Valenzuela, E.P. Zironi, T.J.C. Ortega, M. Terrones,
Thin Solid Films 503 (2006) 212–218.
[22] N.L. Tarwal, V.M. Khot, N.S. Harale, S.A. Pawar, S.B. Pawar, V.B.
Patil, P.S. Patil, Surface & Coatings Technology 206 (2011) 1336–1341.
[23] B. Debadhyan, B. S. Acharya, Ionics 16 (2010) 543–548.
[24] L. Zhifeng, J. Zhengguo, L. Wei, L. Xiaoxin, J Sol- Gel Sci Techn 40
(2006) 25–30.
[25] L.L. Hench, J.K. West. "The Sol-Gel Process". Chemical Reviews 90
(1990) 33.
[26] C.J. Brinker, G.W. Scherer, Sol-Gel Science: The Physics and
Chemistry of Sol-Gel Processing, Academic Press, 1990.
[27] S.K. Wanga, T.C. Lina, S.R. Jian, J.Y. Juangb, J.S.C. Jangc, J.Y.
Tsengd, Applied Surface Science 258 (2011) 1261– 1266.
[28] R. Gupta, N.K. Chaudhury. "Entrapment of biomolecules in sol-gel
matrix for applications in biosensors: problems and future prospects".
Biosens Bioelectron 22 (2007) 2387–2399.
[29] B.E. Yoldas. "Monolithic glass formation by chemical polymerization".
Journal of Materials Science 14 (1979) 1843.
[30] Y. Adraider, Y.X. Pang, F. Nabhani, S.N. Hodgson, Z.Y. Zhang,
Surface & Coatings Technology 205 (2011) 5345–5349.
[31] D. Raoufi, T. Raoufi, Applied Surface Science 255 (2009) 5812–5817.
[32] K.P. Bhuvana, J. Elanchezhiyan, N. Gopalakrishnan, T.
Balasubramanian, Materials Science in Semiconductor Processing 14
(2011) 84–88.
[33] A. Hafdallah, F. Yanineb, M.S. Aida∗, N. Attaf, J. Alloys and Compo
509 (2011) 7267–7270.
[34] T. Wang, Y. Liu, Q. Fang, Y.Xu, G. L, Z. Sun, M. Wu, J. Li, H. He,
Journal of Alloys and Compounds 509 (2011) 9116– 9122.

Thank you for copying data from http://www.arastirmax.com