[1] Satish Rajagopalan, Thomas G. Habetler, Ronald G. Harley, Tomy
Sebastian, and Bruno Lequesne, “ Current/Voltage-Based Detection of
Faults in Gears Coupled to Electric Motors,” IEEE Transactions on
industry applications, Vol. 42, No. 6, November/December 2006.
[2] Antonio Garcia Espinosa, Javier A. Rosero, Jordi Cusido, Luis
Rormeral, and Juan Antonio Ortega, “Fault Detection by Means of
Hilbert-Huang Transform of the Stator Current in a PMSM With
Demagnetization,” IEEE Transactions on energy conversion, Vol. 25,
No. 2, June 2010.
[3] J. W. Cooley and J. W. Tukey, “An algorithm for the machine
calculation of complex Fourier series, ”Math. Comput., vol. 19, pp. 297-301, April 1965.
[4] Y.C.Lee,” Analysis and Diagnosis of Wind Power System Mechanical
Abnormality”, February 2012
[5] L. Wei, H. Wang, and F. Li, “Fault diagnosis of turbine generator
vibration based on wavelet packet and data-driven,” in Proceedings of
the ISECS International Colloquium on Computing, Communication,
Control, and Management, 2009, vol. 2, pp. 29-32.
[6] B. Liu, S. Riemenschneider, and Y. Xu, “Gearbox fault diagnosis using
empirical mode decomposition and Hilbert spectrum,” Mechanical
System and Signal Processing, vol. 20, pp. 718–734, 2006.
[7] P. D. McFadden, “Low frequency vibration generated by gear tooth
impacts,” NDT International Elsevier, vol. 18, no. 5, pp. 279–282, 1985.
[8] J. R. Cameron, W. T. Thomson, and S. Roach, “Vibration and current
monitoring for detecting airgap eccentricity in large induction motors,”
in Proceedings of the IEE Electric Engineering Applications, vol. 133,
no. 3, pp. 155–163, May. 1986.
Thank you for copying data from http://www.arastirmax.com