You are here

Home » Content

TERSİNE LOJİSTİK ÇALIŞMALARININ ARAŞTIRMA YÖNTEMLERİNE GÖRE SINIFLANDIRILMASI

CLASSIFICATION OF REVERSE LOGISTICS STUDIES ACCORDING TO RESEARCH METHODS

Journal Name:

  • Pamukkale Üniversitesi Sosyal Bilimler Enstitüsü Dergisi

Publication Year:

  • 2016
DOI: 
10.5505/pausbed.2016.67044

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
Reverse logistics is a relatively new research area that was begun to study in 1980s, but especially the together studies were majored since 2000s in operations management. In this study the expanding literature on reverse logistics is investigated and studies are classified according to the research methods. Classification is made under three main headings as conceptual studies, empirical studies and mathematical modeling studies and under subheadings according to topics. In this way, it is aimed to be determined majored fields and relatively little-studied fields on reverse logistics which is an interdisciplinary topic and to guide to new studies.
Bookmark/Search this post with
Abstract (Original Language): 
Tersine lojistik üretim işlemler yönetimi içerisinde 1980’lerden itibaren üzerinde çalışılmaya başlanan ama özellikle 2000’li yıllarla birlikte çalışmaların yoğunlaştığı, nispeten yeni bir araştırma alanıdır. Bu çalışmada tersine lojistik konularıyla ilgili genişleyen literatür incelenmiş ve çalışmalar araştırma yöntemlere göre sınıflandırılmıştır. Sınıflandırma kavramsal çalışmalar, ampirik çalışmalar ve matematiksel modelli çalışmalar şeklinde üç ana başlık altında ve konularına göre de alt başlıklar altında yapılmıştır. Bu sayede disiplinlerarası bir konu olan tersine lojistikle ilgili yoğunlaşılmış alanlar ile nispeten az çalışılmış alanların belirlenmesi ve yeni çalışmalara yol göstermek amaçlanmıştır.
FULL TEXT (PDF): 
PDF icon pausbed-67044-research_article-buyukkeklik.pdf
  • 25
47
73
  • Turkish

REFERENCES

References: 

Aksoy, H.K. (2007). “Yeniden Üretim Sistemlerinde En İyi Geri Dönüşüm ve Atık Politikalarının Belirlenmesi”, Eskişehir Osmangazi Üniversitesi Müh. Mim. Fak. Dergisi, XX/2,121-134.
Akyıldırım, Ö.Ö. ve Abdildaev, M. (2016). “Türkiye’de Tersine Lojistik Uygulamaları Üzerine Karşılaştırmalı Bir Sınıflandırma Çalışması”, Ege Akademik Bakış, 16/2, 257-272.
Amini, M.M., Retzlaff-Roberts D. ve Bienstock, C.C. (2005). “Designing A Reverse Logistics Operation For Short Cycle Time Repair Services”, International Journal of Production Economics, 96, 367-380.
Ayvaz, B., Kaçtıoğlu, S. ve Varol, K. (2013). “Belirsizlikler Altında Tersine Lojistik Ağ Tasarımı Literatür Taraması”, İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi, 12/24, 1-15.
Baki, B. (2003). “Tersine Lojistik: Zorunluluk Mu? Kazanç Mı?”, Dokuz Eylül Üniversitesi İşletme Fakültesi Dergisi, 4/1, 18-39.
Barnes, J. H. (1982). “Recycling: A Problem In Reverse Logistics”, Journal of Macromarketing, 2/2, 31–37.
Barros, A. I., Dekker,R. ve Scholten, V.A. (1998). “A Two-Level Network for Recycling Sand: A Case Study”, European Journal of Operational Research, 110/2, 199-214.
Beamon, B. M. ve Fernandes, C. (2004). “Supply Chain Network Configuration for Product Recovery”, Production Planning and Control, 15/3, 270-281.
Bereketli, İ. ve Genevois, M.E. (2009). “Optimization of E-Waste Management In Marmara Region-Turkey”, Proceedings of the International Conference on Prospects for Research in Transport and Logistics, 141-146.
Beullens, P., Oudheusden, D.V. ve Wassenhove, L.N.V. (2004). “Collection and Vehicle Routing Issues in Reverse Logistics”, in Dekker, R., Fleishmann, M., Inderfurth and Van Wassenhove, L.N. (Editors), Reverse Logistics: Quantitative Models for Closed-Loop Supply Chains, Berlin, Springer, 95-134.
66
A.Büyükkeklik, A. Ergülen
Biehl, M., Prater, E. ve Realff, M.J. (2007). “Assessing Performance and Uncertainty in Developing Carpet Reverse Logistics Systems”, Computers & Operations Research, 34, 443–463.
Bostel, N., Dejax, P. ve Lu, Z. (2005). “The Design, Planning and Optimization of Reverse Logistics Networks” in Logistics Systems: Design and Optimization, Langevin, A. and Riopel, D. (Editors) Springer, New York, USA, 171-212.
Bulut, E., ve Deran, A. (2008). “Ters Lojistik Ve Şirketlerin Maliyet Yönetimi Üzerine Etkileri”, GaziÜniversitesi İktisat Bölümü Ekonomik Yaklaşım Dergisi, 19/67, 325–344.
Carter, C. R. ve Ellram, L. M. (1998). “Reverse Logistics: A Review of The Literature and Framework For Future Investigation”, Journal of Business Logistics, 19/1, 85-102.
Cebeci, U., Kılıç, H.S. ve Yüksel, T. (2005). “A Reverse Logistics Application In A Household Appliance Manufacturer ın Turkey”, 35th International Conference on Computers and Industrial Engineering, 405-410.
Chouinard, M., S. D’amours, ve Aıt-Kadı, D. (2005). “Integration of Reverse Logistics Activities within A Supply Chain Information System”, Computers in Industry, 56, 105–124.
Clegg, A.J., Williems, D.J. ve Uzsoy, R. (1995). “Production Planning for Companies with Remanufacturing Capability”, Proceedings of the 1997 IEEE International Symposium on Electronics and the Environment, 285-290.
Daniel, S.E., Pappiis, C.P ve Voutsinas, T.G. (2003). “Applying Life Cycle Inventory to Reverse Supply Chains: A Case Study of Lead Recovery From Batteries”, Resources, Conservation and Recycling, 37, 251-281.
Daniel, S.E., Tsoulfas, G.T., Pappis, C.P. ve Rachaniotis, N.P. (2004). “Aggregating and Evaluating The Result of Different Environmental Impact Assessment Methods”, Ecological Indicators, 4, 125-138.
Daugherty, P. J., Richey, R.G., Genchev, S.E. ve Chen, H. (2005). “Reverse Logistics: Superior Performance Though Focused Resource Commitments to Information Technology”, Transportation Research Part E, 41, 77-92.
de Brito, M.P. ve Dekker, R. (2002). “Reverse Logistics–A Framework”, Econometric Institude Report EI, 2002-38.
Debo, L.G., Savaskan, R.C. ve Van Wassenhove, L.N. (2004). “Coordination in Closed-Loop Supply Chains”, in Dekker, R., Fleishmann, M., Inderfurth and Van Wassenhove, L.N. (Editors), Reverse Logistics: Quantitative Models for Closed-Loop Supply Chains, Berlin, Springer, 295-311.
Dekker, R., Fleishmann, Inderfurth, M. ve Van Wassenhove, L.N. (Editors) (2004). Reverse Logistics: Quantitative Models for Closed-Loop Supply Chains, Berlin, Springer.
Demirel, N. Ö. ve Gökçen, H. (2008a). “Geri Kazanımlı İmalat Sistemleri İçin Lojistik Ağı Tasarımı: Literatür Araştırması”, Gazi Üniv. Müh. Mim. Fak. Der., 23/4, 903-912.
67
Tersine Lojistik Çalışmalarının Araştırma Yöntemlerine Göre Sınıflandırılması
Demirel, N., Ö. ve Gökçen, H. (2008b). “A Mixed Integer Programming Model for Remanufacturing in Reverse Logistics Environment”, Int. Journal Adv Manufacturing Technology, 39, 1197–1206.
Doğan, Ö.İ. ve Kırdan, K. (2014). “Evsel İlaç Atıklarının Toplanmasında Tersine Lojistik Ağı Üzerine Bir Uygulama”, Dokuz Eylül Üniversitesi Denizcilik Fakültesi Dergisi, 6/1, 1-22.
Dowlatshahi, S. (2000). “Developing a Theory of Reverse Logistics”, Interfaces, 30/3, 143-155.
Dowlatshahi, S. (2010). “The Role of Transportation in The Design and İmplementation of Reverse Logistics Systems”, International Journal of Production Research, 48/14, 4199–4215.
Easwaran, G. ve Üster, H. (2010). “A Closed-Loop Supply Chain Network Design Problem with Integrated Forward and Reverse Channel Decisions,” IIE Transactions, 42/11, 779-792.
El-Saandany, A.M.A. ve Jaber, M.Y. (2010). “A Production /Remanufacturing Inventory Model with Price and Quality Dependant Return Rate”, Computers & Industrial Engineering, 58, 352–362.
Erdal, M., Görçün, Ö. F. Görçün, Ö. ve Saygılı, M.S. (2008). Entegre Lojistik Yönetimi, İstanbul, Beta Yayıncılık.
Ergülen, A. ve Büyükkeklik, A. (2008). “Sürdürülebilir Kalkınmanın Ekonomik ve Çevre Boyutları Açısından Atık Yönetimi ve E-Atıklar”, Niğde Üniversitesi İ.İ.B.F. Dergisi, 1/2, 14-21.
Erol, İ., Velioğlu, M. N. ve Şerifoğlu, F. S. (2006). “AB Uyum Yasaları ve Sürdürülebilir Kalkınma Bağlamında Tersine Tedarik Zinciri Yönetimi: Türkiye’ye Yönelik Araştırma Fırsatları ve Önerileri”, İktisat İşletme ve Finans Dergisi, Temmuz, 86-106.
Erol, İ., Velioğlu, M. N., Şerifoğlu F. S., Büyüközkan, G. Aras, N. Çakar, N. D. ve Korugan, A. (2010), “Exploring Reverse Supply Chain Management Practices In Turkey”, Supply Chain Management: An International Journal, 15/1: 43-54.
Erol, R. ve Nakiboğlu, G. (2008). “Yeniden Üretim Ortamlarında Malzeme İhtiyaç Planlaması İçin Bir Matematiksel Programlama Yaklaşımı”, Yöneylem Araştırması ve Endüstri Mühendisliği 28. Ulusal Kongresi, İstanbul.
Ferguson, M. ve Toktay, B. (2006). "The Effect of External Competition on Recovery Strategies", Production and Operation Management, 15/3, 351-368.
Fleischmann, M., Bloemhof-Ruwaard, J. M., Dekker, R., Van Der Laan, E., Van Nunen, J. A. ve Van Wassenhove, L.N. (1997). “Quantitative Models For Reverse Lojistics: A Review”, European Journal of Operational Research, 103/1, 1-17.
Fleischmann, M., Beullens P., Bloemhof-ruwaard, J.M. ve Van Wassenhove, L.N. (2001). “The Impact of Product Recovery on Logistics Network Design”, Production and Operations Management, 10/2, 156-173.
A.Büyükkeklik, A. Ergülen
68
Fleischmann, M., Bloemhof-Ruwaard, J.M., Beullens, P. ve Dekker, R. (2004). “Reverse Logistics Network Design” in Dekker, R., Fleishmann, M., Inderfurth and Van Wassenhove, L.N. (Editors), Reverse Logistics: Quantitative Models for Closed-Loop Supply Chains, Springer, Berlin, 65-94.
Fuente, M.V., Ros, L. ve Cardos, M. (2008). “Integrating Forward and Reverse Supply Chains: Application to A Metal-Mechanic Company”, International Journal of Production Economics, 111, 782-792.
Georgiadis, P. ve Vlachos, D. (2004). “The Effect of Environmental Parameters on Product Recovery”, European Journal of Operational Research, 157, 449-464.
Gınter, P.M. ve Starling, J.M. (1978). “Reverse Distribution Channels for Recycling”, California Management Review, 20, 73–82.
Guide, V.D.R. ve Van Wassenhove, L.N. (2001). “Managing Product Returns for Remanufacturing”, Production and Operations Management, 10, 142-155.
Guiltinan, J.P. ve Nwokoye, N.G. (1975). “Developing Distribution Channels and Systems In The Emerging Recycling Industry”, International Journal of Physical Distribution, 28–38.
Haas, D.A., Murphy, F.H. ve Lancıonı R.A. (2003). “Managing Reverse Logistics Channels with Data Envelopment Analysis”, Transportation Journal, 42/3, 59-69.
Ilgın, M.A. ve Gupta, S.M. (2010). “Environmentally Conscious Manufacturing and Product Recovery (ECMPRO): A Review of The State of The Art”, Journal of Environmental Management, 91, 563-591.
Inderfurth, K. (2005). “Impact of Uncertanities on Recovery Behavior In A Remanufacturing Environment A Numerical Analysis”, International Journal of Physical Distribution & Logistics Management, 35/5, 318-336.
Jayaraman, V., Patterson, R.A ve Rolland, E. (2003). “The Design of Reverse Distribution Networks: Models and Solution Procedures”, European Journal of Operational Research, 150, 128-149.
Kaçtıoğlu, S. ve Ü. Şengül (2010). “Erzurum Kenti Ambalaj Atıklarının Geri Dönüşümü İçin Tersine Lojistik Ağı Tasarımı ve Bir Karma Tamsayılı Programlama Modeli”, Atatürk Üniversitesi İ.İ.B.F. Dergisi, 24 (1), 89-112.
Kapetanopoulou, P. ve Tagaras, G. (2009). “An Empirical Investigation of Value-added Product Recovery Activities in SMEs Using Multiple Case Studies of OEMs and Independent Remanufacturers”, Flexible Service Manfacturing Journal, 21, 92-113.
Karaçay, G. (2005). “Tersine Lojistik: Kavram ve İşleyiş”, Çukurova Üniversitesi Sosyal Bilimler Enstitüsü Dergisi, 14/1, 317-332.
Ko, H.J. ve EVans, G.W. (2007). “A Genetic Algorithm-based Heuristic for The Dynamic Integrated Forward/Reverse Logistics Network for 3PLs”, Computers & Operations Research, 34, 346–366.
Kocabaşoğlu, C., Prahinski, C., ve Klassen, R.D. (2007). “Linking Forward and Reverse Supply Chain Investments: The Role of Business Uncertainity”, Journal of Operations Management, 25/6, 1141-1160.
Tersine Lojistik Çalışmalarının Araştırma Yöntemlerine Göre Sınıflandırılması
69
Kongar, E. ve Gupta, S.M. (2006). “Disassembly Sequencing Using Genetic Algorithm”, International Journal of Advance Manufacturing Technology, 30, 497-506.
Kroon L. ve Vrijens, G. (1995). “Returnable Containers: An Example of Reverse Logistics”, International Journal of Physical Distribution and Logistics Management, 25/2, 56-68.
Krumwiede, D.W. ve Sheu, C. (2002). “A Model For Reverse Logistics Entry by Third-Party Providers”, Omega, 30, 325-333.
Kumar, S. ve Putnam, V. (2008). “Cradle To Cradle: Reverse Logistics Strategies and Opportunities Across Three Industry Sectors”, International Journal of Production Economics, 115, 305-315.
Lambert, A.J.D. (2002). “Determining Optimum Disassembly Sequences in Electronic Equipment”, Computers & Industrial Engineering, 43, 553-575.
Lambert, A.J.D. (2006). “Exact Methods in Optimum Disassembly Sequence Search for Problems Subject to Sequence Dependent Costs”, Omega, 34, 538-549.
Lebreton, B. ve Tuma, A. (2006). “A Quantitative Approach to Assessing The Profitability of Car and Truck Tire Remanufacturing”, International Journal of Production Economics, 104, 639-652.
Li, Y., Chen J. ve Cai, X. (2006). “Uncapacitated Production Planning With Multible Product Types, Returned Product Remanufacturing and Demand Substitution”, OR Spectrum 28, 101-125.
Lu, Z. ve Bostel, N. (2007). “A Facility Location Model for Logistics Systems Including Reverse Flows: The Case of Remanufacturing Activities”, Computers and Operations Research, 34, 299-323.
Majumder, P. ve Groenevelt, H. (2001). “Competition in Remanufacturing”, Production and Operations Management, 10/2, 125-141.
Mansour, S. ve Zarei, M. (2008). “A Multi Period Reverse Logistics Optimization Model for End-of-life Vehicles Recovery Based on EU Directive”, International Journal of Computer Integrated Manufacturing, 21/7, October-November, 764-777.
Meade, L. ve Sarkis, J. (2002). “A Conceptual Model for Selecting and Evaluating Third-Party Reverse Logistics Providers”, Supply Chain Management: An International Journal, 7/5, 283-295.
Minner, S. (2001). “Strategic Safety Stocks in Reverse Logistics Supply Chains”, International Journal of Production Economics, 71, 417-428.
Minner, S. ve Lindner, G. (2004). “Lot Sizing Decisions in Product Recovery Management”, in Dekker, R., Fleishmann, M., Inderfurth and Van Wassenhove, L.N. (Editors), Reverse Logistics: Quantitative Models for Closed-Loop Supply Chains, Berlin, Springer, 157-179.
Mitra, S. ve Webster, S. (2008). “Competition in Remanufacturing and The Effects af Government Subsidies”, Int. J. Production Economics, 111/2, 287-298.
A.Büyükkeklik, A. Ergülen
70
Mutha, A. ve Pokharel, S. (2009). “Strategic Network Design for Reverse Logistics and Remanufacturing Using New and Old Product Modules”, Computers & Industrial Engineering, 56, 334–346.
Nakiboğlu, G. (2007). “Tersine Lojistik: Önemi ve Dünyadaki Uygulamaları”, Gazi Üniversitesi İktisadi ve İdari Bilimler Fakültesi Dergisi, 9, 181-196.
Nakip, M. (2006). Pazarlama Araştırmaları Teknikler ve SPSS Destekli Uygulamalar (2. Basım), Ankara, Seçkin Yayıncılık.
Paksoy, T., Bektaş, T. ve Özceylan, E. (2011b). “Operational and Environmental Performance Measures In A Multi-Product Closed-Loop Supply Chain”, Transportation Research Part E: Logistics and Transportation Review, 47/4, 532-546.
Paksoy, T., Bülbül, H. ve Büyükkeklik, A. (2009). “Ters Tedarik Zinciri Yönetimi”, Lojistik Dergisi, LODER Lojistik Derneği Yayınları, 10, 28-34.
Pappıs, C.P., Daniel, S.E. ve Tsoulfas, G.T. (2004). “LCA as A Tool for The Evaluation of End-of-life Options of Spent Products”, in Reverse Logistics: Quantitative Models for Closed-Loop Supply Chains, Dekker, R., Fleishmann, M., Inderfurth and Van Wassenhove, L.N.(Editors), Berlin, Springer, 334-356.
Patı, R.K., Vrat, P. ve Kumar, P. (2008). “A Goal Programming Model For Paper Recycling System”, Omega, 36, 405-417.
Pokharel S. ve Mutha, A. (2009). “Perspectives in Reverse Logistics: A Review”, Resources, Conservation and Recycling, 175-182.
Prahınskı, C. ve Kocabaşoğlu, C. (2006). “Emprical Research Opportunities in Reverse Supply Chain”, Omega, 34, 519-532.
Ravı V, Shankar, R.ve Tiwari, M.K. (2005). “Analyzing Alternatives in Reverse Logisticsfor End-Of-Life Computers: ANP and Balanced Scorecard Approach”, Computers &Industrial Engineering, 48, 327-356.
Repoussis, P.P., Paraskevopoulos, D.C., Zobolas G., Tarantilis, C.D. ve Ioannou, G. (2009). “A Web-Based Decision Support System For Waste Lube Oils Collection and Recycling”, European Journal of Operational Research, 195, 676–700.
Rıchey, R.G., Chen, H., Genchev, S.T. ve Daugherty, P.J. (2005). “Developing Effective Reverse Logistics Programs”, Industrial Marketing Management, 34, 830-840.
Rogers, D.S ve Tibben-Lembke, R. (2001). An Examination of Reverse Logistics Practices, Journal of Business Logistics, 22/2, 129-148.
Rogers, D.S. ve Tibben-Lembke, R. (1998). Going Backwards: Reverse Logistics Trends and Practices, Reverse Logistics Executive Council, Pittsburgh, PA.
Rubio S., Chamorro, A. ve Miranda, F.J. (2008). “Characteristics of The Research on Reverse Logistics, International Journal of Production Research, 46/4, 1099-1120.
Salema, M. I., A. P. B. Povoa ve Novais, A. Q. (2006). “A Warehouse-Based Design Model For Reverse Logistics”, Journal of The Operational Research Society, 57, 615–629.
Sarkis, J. (1998). “Evaluating Environmental Consious Business Practices”, European Journal of Operational Research, 107, 159-174.
Tersine Lojistik Çalışmalarının Araştırma Yöntemlerine Göre Sınıflandırılması
71
Schultmann, F., Engels, B. ve Rentz, O. (2003). “Closed-Loop Supply Chains for Spent Batteries”, Interfaces, Nov/Dec 33, 6, ABI/INFORM Global: 57-71.
Schultmann, F., Zumkeller, M. ve Rentz, O. (2006). “Modeling Reverse Logistic Tasks within Closed-Loop Supply Chains: An Example from the Automotive Industry”, European Journal of Operational Research, 171, 1033–1050.
Sheu J.B. (2008). “Green Supply Chain Management, Reverse Logistics and Nuclear Power Generation”, Transportation Research Part E, 44, 19–46.
Sheu J.B., Chou, Y.H. ve Hu, C.C. (2005). “An Integrated Logistics Operational Model for Green Supply Chain Management”, Transportation Research Part E, 41, 287-313.
Skapa, R. (2005). “The Importance of Reverse Logistics in The Chech Republic”, Proceedings of Sixty International Conference Enterprise in Transition, 565-574.
Smıth, A.D. (2005). “Reverse Logistics Programs: Gauging Their Effects On CRM and Online Behavior”, The Journal of Information and Knowledge Management Systems, 35/ 3, 166-181.
Spengler,T., Puchert,H., Penkuhn,T. ve Rentz, O.(1997).“Environmental Integrated Production and Recycling Management”,European J. of Operational Research, 97, 308-326.
Srivastava, S. K. (2007). “Green Supply-Chain Management: A State-of-the-art Literature Review”, International Journal of Management Reviews, 9/1, 53-80.
Srivastava, S.K. ve Srivastava, R.K. (2006). “Managing Product Returns for Reverse Logistics”, International Journal of Physical Distribution & Logistics Management, 36/7, 524-546.
Stock, J.R. (1992). Reverse Logistics, Council of Logistics Management, Oak Brook, IL.
Tablot, S., Lefebvre, E. ve Lefebvre, L.A. (2007). “Closed-loop Supply Chain Activities and Derived Benefits in Manufacturing SMEs”, Journal of Manufacturing Technology Management, 18/6, 627-658.
Tan, A.W., Yu, W.S. ve Arun, K. (2003). ”Improving The Performance of a Computer Company in Supporting Its Reverse Logistics Operations in The Asia-Pasific Region”, Int. Journal of Physical Distribution & Logistics Management, 33/1, 59-74.
Teunter, R.H. (2006). “Determining Optimal Disassembly and Recovery Strategies”, Omega 34, 533-537.
Tibben-Lembke, R.S. (2002). “Reverse Logistics and The Product Life Cycle”, International Journal of Physical Distribution & Logistics Management, 32/3, 223-244.
Tibben-Lembke, R.S. ve Rogers, D.S. (2002). “Differences Between Forward and Reverse Logistics in A Retail Environment”, International Journal of Supply Chain Management, 7/5, 271-282.
Toktay, B., Van Der Laan, E.A. ve De-Brito, M.P. (2004). “Managing Product Returns: The Role of Forecasting”, in Dekker, R., Fleishmann, M., Inderfurth and Van Wassenhove, L.N. (Editors), Reverse Logistics: Quantitative Models for Closed-Loop Supply Chains, Berlin, Springer, 45-64.

Thank you for copying data from http://www.arastirmax.com