You are here

Home » Content

DİNAMİK ABSORBERİN HARMONİK UYARIYA MARUZ BİR KİRİŞİN DİNAMİK DAVRANIŞINA ETKİSİ

The Effect of Dynamic Absorber on the Dynamic Behavior of a Beam Subject To a Harmonic Excitation

Journal Name:

  • Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi

Publication Year:

  • 2010

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
Dynamic absorbers are one of the quite old, but significant topics of vibration theory. Adding appropriate dynamic absorber/s, a system in danger of resonance under external excitations can be brought into safe working conditions. In this paper, the dynamic behavior of a beam and rectilinear absorber system subject to a harmonic force excitation is concerned with. First, it is dealt with how to find the natural frequencies of the combined system by means of Galerkin’s method. Then, the variation of maximum amplitude of a chosen beam point with respect to the tuning parameter that is defined as the ratio of absorber frequency to beam fundamental frequency is studied whereas the position of absorber attachment point (absorber location) and the ratio of absorber mass to the beam mass (mass ratio) are considered as parameters. For both parameters, it is observed that maximum amplitude curves have local minima, which implies that these graphics can be used as a kind of design charts.
Bookmark/Search this post with
Abstract (Original Language): 
Dinamik absorberler titreşim teorisinin hayli eski, ama önemli konularından biridir. Dış uyaranların etkisinde rezonans tehlikesine maruz kalan herhangi bir sistem uygun dinamik absorber veya absorberler eklenerek güvenli çalışma koşullarına getirilebilir. Bu çalışmada harmonik bir tekil kuvvete maruz üniform kirişin doğrusal hareket absorberi eklenmesi halindeki davranışı ele alınmakta, absorber bağlantı noktası konumu ile absorber kütlesi/kiriş kütlesi oranına bağlı olarak seçilen bir kiriş noktasının maksimum genliğin absorber frekansı/kiriş temel frekansı olarak tanımlanan bir ayar parametresine göre değişimi incelenmektedir. Her iki parametre için ayar parametresinin 1’e eşit olması halinde lokal minimumlar gözlenmektedir. Bu değişim eğrileri grafiklerinin bir tür tasarım kartları olarak kullanılabileceği gösterilmektedir.
FULL TEXT (PDF): 
PDF icon arastirmax-dinamik-absorberin-harmonik-uyariya-maruz-bir-kirisin-dinamik-davranisina-etkisi.pdf
  • 1
27-39
  • Turkish

REFERENCES

References: 

1. Den Hartog J.B. (1961) Mekanik Titreşimler. Çevirenler: Palavan S., Demirgüç Z. İTÜ kütüphanesi yayınları.
No.164 İstanbul.
2. Hunt J. B. (1979). Dynamic Vibration Absorbers. Mechanical Engineering Publications Ltd.. Londra.
3. Jones, D. I. G., Nashif, A. D. and Adkins, R. L. (1967). Effect of tuned dampers on vibrations of simple
structures, AIAA Journal, 5(2), 810-815.
4. Jones, D. I. G. (1967), Response and damping of a simple beam with tuned dampers, The Journal of the
Acoustical Society of America, 42(1), 50-53.
5. Kozima, H. and Saito, H. (1983). Forced vibrations of a beam with a non-linear dynamic vibration absorber,
Journal of Sound and Vibration, 88(4), 559-568.
6. Liu, K. and Liu, J. (2005). The damped vibration absorbers: revisited and new result, Journal of Sound and
Vibration, 284(3-5), 1181-1189.
7. Moradi H., Bakhtiari-Nejad F., Mocahhedy M. R. (2008). Tuneable vibration absorber design to suppress
vibrations: an application in boring manufacturing process, Journal of Sound and Vibration, 318(1-2), 93-
108.
8. Özgüven, H. N. and Çandır, B. (1986). Suppressing the first and second resonances of beams by dynamic
vibration absorbers, Journal of Sound and Vibration, 111(3), 377-390.
9. Snowdon, J. C. (1966). Vibration of cantilever beams to which dynamic absorbers are attached, The Journal
of The Acoustical Society of America, 39(5), pp. 878-886.
10. Snowdon, J. C. (1975). Platelike dynamic vibration absorbers, Journal of Engineering for Industry, 97(1), 88-
93.
11. Snowdon, J. C. (1980). Beamlike dynamic vibration absorbers, Acoustica, 44(2), 98-108.
12. Snowdon, J. C. (1984). The crusiform dynamic vibration absorbers, The Journal of The Acoustical Society of
America, 75(6), 1792-1799.
13. Wong W.O., Tang S.L.,Cheung Y.L., Cheng L. (2007). Design of a dynamic vibration absorber for vibration
isolation of beams under point or distributed loading. Journal of Sound and Vibration, 301(3-5), 898–908.

Thank you for copying data from http://www.arastirmax.com