[1] Molenaar A.A.A., and Van Niekerk A.A. (2002): Effects of gradation, composition, and degree of compaction on the mechanical characteristics of recycled unbound materials, Transportation Research Record, No. 1787, pp. 73-82.
[2] Macarthy R.A., (1989): General Report: Waste Alternative Materials, Unbound Aggregates in Road Construction, Jones R.H. & Dawson A.R. edited Butterworths Pub. , Proceeding of The 3rd International Simposium on Unbound Aggregates in Roads(UNBAR 3) Nottingham, United Kingdom, 11-13, June, 1989.
[3] Xuan, D. X., Hoube, L. J. M., Molenaar, A. A. A., Shui, Z. (2012): Investigation of Combined Effect of Mixture Variables on Mechanical Properties of Cement Treated Demolition Waste, Engineering Journal, Vol. 16 (4), pp. 107-116.
[4] Agrela, F., Ramirez, A., Barbrado, A. and Galvin, A. P. (2012): Real Application of Cement Treated Mixed Recycled Aggregates on Road Based in Malaga, Transportation Research Board Annual Meeting.
[5] Poon C.S. and Chan D., (2005): Feasible use of recycled concrete aggregates and crushed clay brick as unbound road sub-base, Construction and building materials, Vol. 20, pp. 578-585.
[6] Li, X., (2008), Recycling and reuse of waste concrete in China Part I. Material behavior of recycled aggregate concrete. Journal of Resources Conservation and Recycling 2008;53(1): pp.36–44.
[7] Khaloo, A. R., (1994) ‘Properties of concrete using crushed clinker brick as coarse aggregate’, ACI Mat. J., 91 (2) (1994), pp. 401-407.
[8] Khalaf, F.M. and DeVenny, A.S., (2004), Recycling of demolished masonry rubble as course aggregate in concrete: review’, ASCE Journal of Materials in Civil. Eng. 16 (4), pp. 1-10.
[9] Ksegic, I., Netinger, I., Bjegovic, D. (2008), Recycled clay brick as an aggregate for concrete: A review, Technical Gazette, Vol. 15, Issue 3, pp. 35-40.
[10] O’Mahony MM, Milligan GWE. (1991): Use of recycled materials in sub-base layers, Transport Res Record,1310: pp.73–80.
[11] Khalaf, F. M., (2004), Recycling of clay bricks as aggregate in asphalt concrete, International RILEM conference on the use of recycled materials in building and structures, Ed. Vasquenz et al., (2004).
[12] Serkan, T., (2008), Mechanical evaluation of asphalt–aggregate mixtures prepared with fly ash as a filler replacement. Canadian Journal of Civil Engineering; 35(1):pp. 27–40.
[13] Ahmed H. Y., Othman A. M., (2006), Effect of using waste cement dust as mineral filler on the mechanical properties of hot mix asphalt. Ass University Bulleting Environment and Resource, ;9(1):pp. 51–59.
[14] Hwang, S. D, Park, H. M, Rhee, S. K., (2008), A study on engineering characteristics of asphalt concrete using filler with recycled waste lime. Waste Management, 28(1): pp. 191–199.
[15] Chen, M., Lin, J., Wu, S. and Liu, C. (2011), Utilization of recycled brick powder as alternative filler in asphalt mixture, Journal of Construction and Building Materials, Vol. 25, pp. 1532-1536.
[16] Chen, M., Lin, J., Wu, S., (2011), Potential of recycled fine aggregates powder as filer in asphalt mixtures, Journal of Construction and Building Materials, Vol. 25, pp. 3909-3914.
[17] Asphalt Institute (1997): Mix design methods for asphalt, 6th ed., MS-02, Asphalt Institute, Lexington, KY.
[18] Khosla, P. and Harikrishnan, K. T., (2007), Tensile strength- A design and evaluation tool for superpave mixtures, Final report, FHWA/NC/2006-24, Department of civil engineering, University of North Carolina, US.
Thank you for copying data from http://www.arastirmax.com