Buradasınız

Taneli Tarımsal Ürünler İçin Akış Profilleri ve Silolamada Karşılaşılan Sorunlar

Silo Flow Profiles for Grainy Agricultural Products and Encountering Problems in Silos

Journal Name:

Publication Year:

Keywords (Original Language):

Abstract (2. Language): 
In this study, the flow profiles of silo that is more important for designing of silos of grain crop (cereals) used in various areas because of nutrient features was taken up. In the study scope, flow profiles for silos were introduced and some flow problems as factors influencing on the flowability of grainy products arching, ratholes (also called pipes) and segregation was explained in detail
Abstract (Original Language): 
Bu çalısmada zengin besin maddeleri nedeniyle çok degerli ve kullanım çesitliligi olan taneli tarımsal ürünlerin (tahıllar) depolandıgı silolarlarda tasarım parametresi olarak özel önem arz eden akıs profilleri ele alınmıstır. Çalısma kapsamında silo içerisinde olusan akıs profilleri tanıtılarak; taneli ürünlerin akıskanlıgı üzerinde etkili olan; kemerlenme, kanallanma ve ayrısma gibi bazı silo akıs problemleri detaylı olarak açıklanmıstır.

REFERENCES

References: 

Anonymous, 2006. Silo design. Bulk solids engineering.
http://www.bulksolids.nl/uk/7silodesi.html.
Ayuga, F., Aguado, P., Gallego, P.E., and Ramirez, A.,
2005. New steps towards the knowledge of silos
behavior. International Agrophysics 19, 7-17.
Chase, G.G., 2006. Solids notes. The University of Akron.
Çaglı, S., 2005. Katı yıgınların akıs özelliklerinin
belirlenmesi ve silo tasarımı. Yüksek Lisans Tezi
(Basılmamıs), stanbul Teknik Üniversitesi Fen
Bilimleri Enstitüsü, stanbul, 204s.
Craik D.J., and Miller, B.F., 1958. The flow properties of
powders under humis conditions. Journal of
Pharmacology, 10, 136-144.
Farnish, R., 2002. Perfecting powder storage&discharge.
http://www.chemicalprocessing.com/articles/2002/2
14.html.
Fitzpatrick, J.J., Iqbal, T., Delaney, C., Twomey, T., and
Keogh, M.K., 2004. Effect of powder properties and
storage conditions on the flowability of milk
powders with different fat contents. Journal of Food
Engineering, 64, 435-444.
Ganesan, V., Rosentrater, K.A., and Muthukumarappan,
K., 2008. Flowability and handling characteristics of
bulk solids and powders – a review with
implications for DDGS. Biosystems Engineering,
425-435.
Hao, B., 1998. The effects of inserts on flow behavior of
cohesive bulk solids in a model bin. Msc. Thesis.
University of Manitoba Winnipeg, Department of
Bioystems Engineering, Manitoba, 125p.
T.ÖZTÜRK, H.KBAR, B.ESEN
67
Jacob, K., 2000. Bin and hopper design. The Dow
Chemical Company Solids Processing
http://chemical.uakron.edu/fclty/chase/Solids/Bin%2
0and%20Hopper%20Design%20Lecture.ppt.
Jenike, A.W., 1964. Storage and flow of solids. University
of Utah Engineering, Experiment Station, Bulletin
123.
Johanson J.R., 1978. Know your material-how to predict
and use the properties of bulk solids. Chemical
Engineering, 9-17.
Kobielak, S., and Shalouf, F.F., 1999. Application of
discharge tubes in the grain silos. International
Agrophysics 13, 401-403.
Marinelli, J., and Carson, J.W, 1992. Solve solids flow
problems in bins, hoppers and feeders. Chemical
Engineering Progress, 85, 22-28.
Marinelli, J., 2001. Mass flow design considerations?
(Arching-Part 1). http://www.solidshandlingtech.
com /ask_joe_articles/arching_part_one.html.
Molenda, M., and Horabik, J. 2005. Mechanical properties
of granuler agro-materials. Agrophysics Centre of
Excellence for Applied Physics in Sustainable
Agriculture. Institute of Agrophysics PAS, Lublin.
Moreyra, R, and Peleg, M., 1981. Effect of equilibrium
water activity on the bulk properties of selected food
powders. Journal of Food Science, 46, 1918-1922.
Özel, K., 2007. Çelik hububat silolarının tasarım esasları.
Yüksek Lisans Tezi (Basılmamıs), Selçuk
Üniversitesi Fen Bilimleri Enstitüsü, Konya, 184 s.
Prescott, J.K., and Barnum, R.A., 2000. On powder
flowability. Pharmaceutical Technology, 60-84.
Roberts, A.W., 1992. Basic principles of bulk solids
storage, flow and handling, The Institute for Bulk
Materials Handling Research, Callaghan, Australia.
Schulze, D., 1998. Storage of powders and bulk solids in
silos; http://www.dietmar-schulze.de/storage.html.
Takahashi, H., and Yanai, H., 1973. Flow profile and void
fraction of granular solids in a moving bed. Powder
Technology, 7, 205-214.
Waters, A.J., and Drescher, A., 2000. Modeling plug flow
in bins/hoppers. Powder Technology, 113, 168-175.
Watson, G.R., and Rotter, J.M., 1996. A finite element
kinematic analysis of planar granular solids flow.
Chemical Engineering Science, 51, 3967-3978.
Woodcock, P.C., and Mason, J.S., 1987. Bulk solids
handling, Chapman&Hall, London.

Thank you for copying data from http://www.arastirmax.com