Buradasınız

Anasayfa » Content

İKİ FARKLI POLİSAJ YÖNTEMİNİN POSTERİOR DİŞLERDE KULLANILAN KOMPOZİT MATERYALLERİ ÜZERİNE ETKİSİ

THE EFFECT OF TWO DIFFERENT POLISHING TECHNIQUE ON POSTERIOR COMPOSITE MATERIALS

Journal Name:

  • İstanbul Üniversitesi Diş Hekimliği Fakültesi Dergisi

Publication Year:

  • 1993

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
After the microhardness of three different posterior composite resin materials had been evaluated, the polis-hingwas applied with Al 02 discs and silicon rubber. Then the surface roughnees of these materials were examined with profilometer and SEM. The polishing technique with discs were found to be effective on the hybrid composite resins (Brilliant lux) having a high microhardness values. On the contrary, polishing with the rubber was effective on the micrqftll composite resins (EOS-Heliomolar) having a low microhardness values.
Bookmark/Search this post with
Abstract (Original Language): 
Üç değişik posterior korapozit rezin materyalinin mikrosertlik değerleri Ölçüldükten sonra, A102'li diskler ve silikon lastiklerle polisaj uygulanarak, yüzey pürüzlük-leri profilometre ve SEM ile incelendi. Sertliği daha fazla bulunan kibrit yapıda olan kompozitte (Brilliant Lux) diskler ile daha az sertliğe sahip mikrofil yapıda olan kompozit-lerde (EOS-Heliomalar) ise lastiklerle pürüzsüz yüzeyler elde edildi.
FULL TEXT (PDF): 
PDF icon arastirmax-iki-farkli-polisaj-yonteminin-posterior-dislerde-kullanilan-kompozit-materyalleri-uzerine-etkisi.pdf
  • 1
8
12
  • Turkish

REFERENCES

References: 

1.
Alaçam
, A., Burgaz, Y.: Çeşitli Polisaj Yöntemlerinin Restoratİf Rezin Renklenmeleri Üzerine Etkisi. A.Ü. Diş Hek. Fak.Derg., 1989; 16:123-127.
2.
Aykut
, A.Ş., Alpaslan, G.: Isopast ve Heliosit Dolgu Maddelerinin Yüzey Pürüzlülüğü Özelliklerinin Karşılaştırmalı Olarak İncelenmesi. H.Ü. Diş Hek. Fak. Derg., 1989; 13(3): 152¬156.
3. Baum, L., Phillips, R.W.: Operative Dentistry. 2nd. ed. W.B. Saunders Company, Toronto, 1989; 235.
4.
Bayırlı
, G.Ş., Şirin, Ş.: Restoratİf Tedavi, Taş Matbaası, İstanbul, 1985; 164.
5. Biederman, J.D.: Direct Composite Resin Inley. J.Prost-hetDent, 1989; 62: 249-253.
6. Bophosİan, A.A., Randolph, R.G., Jekkals, V.J.: Rotary Instrument Finishing of Microfilîed and Small-Particle Hybrid Composite Resins. JA.DA., 1987; 115: 299-301.
7. Council on Dental Materials, Instruments and Equipment: Posterior Composite Resins. JA.DA., 1986; 112: 707-709.
8. Craig, R.G., et al.: Restorative Dental Materials. 8th. ed. St. Louis: C.V. Mosby Co., 1985; 226-238.
9. Craig, R.G., O'Brien, W.J., Powers, J.M.: Dental Materials Properties and Manipulation. 3th ed. St.Louİs: C.V. Mosby Co., 1983; 112-3.
10. Dodg, N.W., Dole, R.A., Cooley, R.L., Duke, E.S.:
Comparison of Wet and Dry Finishing of Resin Comgosites with Aluminum Oxide Discs. Dent. Mater., 1991; 7: 18-21.
11. Lacy, A.M.: A Critical Look at Posterior Composite Restorations. JA.DA., 1987; 114: 357-362.
12. Lutz, F., Phillips, R.N.: A classification and Evaluation of Composite Resin Systems. J. ProsthetDent., 1983; 50: 480¬488.
13. Lutz, F., Setcos, J.C., Phillips, R.W.: New Finishing Instruments for Composite Resins. JA.DA., 1983; 107: 575-580.
14. Norteast, S.E., Van Noort, R.: Finishing and Polishing Procedures for Posterior Composite Resin. J. Dent. Res.,1986; (Abstr.) 65: 798.
15. Stanford, W.B., Wozniak, W.T., Fan, P.L., Stanfort, J.W.: Effect of Finishing on Color and Gloss of Composites with Different Filier./.A.D.A., 1985; 110: 211-3.
16. Stoddard, J.W., Johnson, G.H.: an Evaluation of Polishing Agents for Composite Resins. J. Prosthet. Dent., 1991; 65: 491-5.
17. Tjan, A.H.L., Chan, C.A.: The Polishability of Posterior Composites. J.Prosthet. Dent., 1989; 61: 138-146.
18. Weitman, R.T., Eames, W.B.: Plaque accumulation on Composite Surfaces After Various Finishing Procedures. JA.DA., 1975:91: 101-106.

Thank you for copying data from http://www.arastirmax.com