Buradasınız

E SINIFI İNVERTERLİ MUTFAK TİPİ BİR İNDÜKSİYON ISITMA UYGULAMASI

AN INDUCTION HEATING APPLICATION FOR HOME COOKING WITH CLASS E INVERTER

Journal Name:

Publication Year:

Abstract (2. Language): 
Induction heating, which has been used in melting, heating and surface hardening of metals, is also widely used in home cooking applications nowadays. Induction heaters are more advantageous than the others because they are clean, fast, highly efficient and they don’t increase temperature of working environment. An induction heating system basically consists of a coil and a DC/AC inverter. This inverter system transforms the DC into AC for the induction heater coil. In this study a single phase medium frequency home type induction heating system which has high efficiency, low cost and small size is made. Because of its simplicity and economy class E inverter is used as DC/AC inverter. PSpice simulation of the presented system is done and a working prototype of low power of circuit is made in laboratory.
Abstract (Original Language): 
İndüksiyon ısıtma metallerin ısıtılması, eritilmesi ve yüzey sertleştirme işlemlerinin yanı sıra günümüzde mutfak uygulamalarında da yaygın olarak kullanılmaktadır. İndüksiyon ısıtıcıların bilinen ısıtıcılara göre temiz, hızlı, yüksek verimli olması ve çalıştığı ortam ısısını yükseltmemesi gibi önemli avantajları vardır. Temel olarak bir indüksiyon ısıtma sistemi, bir bobin ve bir DC/AC güç dönüştürücü içerir. Dönüştürücü sistemi DC’ yi ısıtma bobininde kullanılmak üzere AC’ ye çevirir. Bu çalışmada fiziki boyutlar ve ağırlığı arttırmadan düşük maliyetli ve yüksek verimli bir fazlı orta frekanslı ev tipi bir indüksiyon ısıtma sistemi gerçekleştirilmiştir. DC/AC dönüştürücü olarak ekonomik ve basit olması nedeniyle E sınıfı inverter kullanılmıştır. Sunulan sistemin PSpice simülasyonu yapılmış ve devrenin laboratuarda küçük güçlü çalışan bir prototipi gerçekleştirilmiştir.
FULL TEXT (PDF): 
68-73

REFERENCES

References: 

[1] Espi J. M., Dede E. J., “Design Consideration for Three Element L-LC Resonant
Inverters for Induction Heating”, Int. J. Electronics, 86, 10, 1205-1216, 1999.
[2] Sazak B. S., “Design of a 500W Resonant Induction Heater”, Pamukkale
Üniversitesi Mühendislik Bilimleri Dergisi, 5, 1, 871-878, 1999.
[3] Hart D. W., “Introduction to Power Electronics”, 1 Cilt, 1.Baskı, Prentice Hall, 1997,
338-339.
[4] Liu K. H., Oruganti R., Lee F. C., “Resonant Switches-Topologies and Characteristics”,
IEEE Power Electronics Specialists Conference, 0275-9306, 85, 106-116, 1985.
[5] Chatterjee K., Ramanarayanan V., “A Comparative Study of Inverter Circuits for
Induction Heating”, International Power Engineering Conference, Singapore, Mart, 537-
547, 1993.
[6] Po W., Komatsu W., “A Simple and Reliable Class E Inverter for Induction Heating
Applications”, Int. J. Electronics, 84, 2, 157-165, 1998.
[7] Egan L. R., Furlani E. P., “A Computer Simulation of Induction Heating System”, IEEE
Transactions on Magnetics, 27, 5, 4343-4354, 1991.

Thank you for copying data from http://www.arastirmax.com