Buradasınız

GÖRÜNTÜ ANALİZİ YAKLAŞIMI İLE DİKİŞ BÜZÜLMESİ ÖLÇÜMÜ

Measurement of Seam Puckering With Image Analysis Approach

Journal Name:

Publication Year:

Keywords (Original Language):

Abstract (2. Language): 
In this study objective measurement of seam puckering and evaluation of the obtained data were presented. A device consisting of camera, illumination system and rotating stage was developed for measurement. Puckered fabric surface profile was extracted using image processing techniques. Wrinkle densities were calculated for puckered fabrics which were evaluated by experts subjectively in previous study. Results were compared with standart subjective method ratings. Fast, inexpensive measurement system was developed and sufficient seam puckering degrees were calculated.
Abstract (Original Language): 
Bu çalısmada dikis büzülmesinin objektif ölçümü ve elde edilen verilerin değerlendirilmesi sunulmustur. Ölçüm için kamera, ısıklandırma sistemi, dönen platformdan olusan bir düzenek gelistirilmistir. Görüntü analizi teknikleri kullanılarak, büzülmüs kumas yüzey profili elde edilmistir. Önceki çalısmada uzmanlar tarafından subjektif olarak değerlendirmis kumaslar için, kırısıklık yoğunlukları hesaplanmıstır. Sonuçlar, standart subjektif metot değerleri ile karsılastırılmıstır. Hızlı ve maliyeti düsük bir ölçüm sistemi gelistirilmis, yeterli hassasiyette dikis büzülme dereceleri hesaplanmıstır.
35-44

REFERENCES

References: 

1. AATCC Test Method 88B (2003), Smoothness of Seams in Fabrics after Repeated Home Laundering,
AATCC Technical Manuel, 114-117.
2. Becerir, B. (1998), Renk Ölçüm Cihazlarının Temel Özellikleri, Tekstil Terbiye&Teknik, Eylül, 59-63.
3. Fan, J., Yu W., Hunter L. (2004) Clothing Appearance and Fit: Science and Technology, CRC Press, Washington,
DC.
4. Fan, J., Liu, F. (2000), Objective Evaluation of Garment Seams Using 3D Laser scanning technology, Textile
Research Journal, 70 (11), 1025-1030.
5. Kang, T. J., Kim S. C., Sui I. H., Youn J. R., Chung K. (2005), Fabric Surface Roughness Evaluation Using
Wavelet-Fractal Method (part I), Textile Research Journal, 75 (11), 751-760.
6. Kısaoğlu Ö. (2006), Kumas Kalite Kontrol Sistemleri, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi,
12 (2), 233-241.
7. Korkmaz, H. C. (2007), Bazı Kumas Parametrelerinin Dikis Büzülmesine Etkilerinin Arastırılması, Yüksek
Lisans Tezi, U.Ü. Fen Bilimleri Enstitüsü.
8. McDonald, R. (1987), Colour Physics for Industry, SDC, England.
9. Meriç, B., Gürarda A. (2001), Dikis Büzülmesinin Ölçülmesinde Objektif Yaklasımlar (1), Konfeksiyon&
Teknik, Mayıs, 80-82.
10. Park, C. K. and Lee, D. H. (1997), A New Evaluation of Seam Pucker and Its Applications, International
Journal of Clothing Science and Technology,9 (3),252-255.
11.Xu, B., Cuminato D. F., Keyes N. M. (1998), Evaluation of Fabric Smoothness Appearance Using A Lazer
Profilometer, Textile Research Journal, 68 (12), 900-906.

Thank you for copying data from http://www.arastirmax.com