[1] Zamanian, R., (1995). "Corrosion and its control." 2nd edition. University of Tehran press. (in Persian)
[2] Koch, G.H., Brogers, P.H., Thompson, N., Virmani, Y.P., Payer, J.H., (2002). "Corrosion cost and preventive strategies in the United States.", FHWA Report, Federal Highway Administration.
International Journal of Science and Engineering Investigations, Volume 6, Issue 65, June 2017 80
www.IJSEI.com Paper ID: 66517-12
ISSN: 2251-8843
[3] De Muynck, W., De Belie, N., Verstraete, W., (2009). "Effectiveness of admixtures, surface treatments and antimicrobial compounds against biogenic sulfuric acid corrosion of concrete." Cement & Concrete Composites, 31, 163–170.
[4] Hewlett, P.C., (1998). "Lea’s Chemistry of Cement and Concrete", 4th edition, ARNOLD, 324-327.
[5] Monteny, J., De Belie, N., Vincke, E., Verstraete, W., Taerwe, L., (2001). "Chemical and microbiological tests to simulate sulfuric acid corrosion of polymer-modified concrete", Cement and Concrete Research, 31, 1359–1365.
[6] Rendell, F., Jauberthie, R., (1999). "The deterioration of mortar in sulphate environments." Construction and Building Materials, 13, 321–327.
[7] Monteny, J., Vincke, E., Beeldens, A., De Belie, N., Taerwe, L., Van Gemert, D., Verstraete, W., (2000). "Chemical, microbiological, and in situ test methods for biogenic sulfuric acid corrosion of concrete." Cement and Concrete Research, 30, 623–634.
[8] Broomfield, J.P., (2007). "Corrosion of steel in concrete, Understanding, Investigation and Repair." Second edition published. Taylor & Francis.
[9] Lachemi, M., Hossain, K.M.A., Lambros, V., Nkinamubanzi, P.-C., Bouzoubaa, N., (2004). "Self-consolidating concrete incorporating new viscosity modifying admixtures." Cement and Concrete Research, 34, 917–926.
[10] Ji, T., (2005). "Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO2." Cement and Concrete Research, 35, 1943-1947.
[11] Jo, B.W., Kim, Ch.H., Tae, Gh.h., Park, J.B., (2007). "Characteristics of cement mortar with nano-SiO2 particles." Construction and Buildings Materials, 21, 1351-1355.
[12] Li, H., Xiao, H.G., Yuan, J., Ou, J., (2004). "Microstructure of cement mortar with nano-particles", Composites, Part B 35, 185–189.
[13] Li, G., (2004). "Properties of high-volume fly ash concrete incorporating nano-SiO2." Cement and Concrete Research, 34, 1043-1049.
[14] Park, J.S., Park, Y.J., Heo, J., (2007). "Solidification and recycling of incinerator bottom ash through the addition of colloidal silica (SiO2) solution." Waste Management, 27, 1207–1212.
[15] Qing, Y., Zenan, Zh., Deyu, K., Rongshen, ch., (2007). "Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume", Construction and Buildings Materials, 21, 539-545.
[16] Senff, L., Labrincha, J.A., Ferreira, V.M., Hotza, D., Repette, W.L., (2009). "Effect of nano-silica on rheology and fresh properties of cement pastes and mortars." Construction and Buildings Materials, 23, 2487-2491.
[17] Tamimi, A.K., (1997). "High-performance concrete mix for an optimum protection in acidic conditions." Materials and Structures/Mat~riaux et Constructions, 30, 188-191.
[18] Qian, Sh., Cusson, D., (2004). ″ Electrochemical evaluation of the performance of corrosion-inhibiting systems in concrete bridges.″ Cement & Concrete Composites, 26, 217- 33.
[19] Moon, H.-Y., Shin, K.-J., (2007). ″ Frost attack resistance and steel bar corrosion of antiwashout underwater concrete containing mineral admixtures″, Construction and Buildings Materials, 21, 98-108.
[20] Neville, A., M., (1995). "Properties of concrete", 4th edition, Harlow, UK, Longman Group Limited.
[21] Transportation Research Board, (1991). "Highway Deicing: comparing salt and calcium magnesium acetate", Special Report 235, National Research Council.
[22] Wallbank, E.J., (1989). "The performance of concrete in bridges: A survey of 200 Highway bridges", London: HMSO.
[23] EFNARC, (2002). "The European guidelines for self-compacting concrete, The European federation of specialist construction chemicals and concrete systems." Available from:
[Accessed 1 February 2002].
[24] Mehta, P.K., Monteiro, P. J. M., (2006). "Concrete Microstructure, Properties, and Materials", Third Edition, McGraw-Hill.
[25] Schiessel, P., (1988). "Corrosion of Steel in Concrete Report of the Technical Committee 60-CSC RILEM." First published, Chapman and Hall Ltd.
[26] ASTM C876-99, (2003). "Standard test method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete." Annual book of ASTM standards, V. 3.02. American Society for Testing and Materials, Philadelphia, PA.
[27] AASHTO TP 95, (2011). "Standard Method of Test for Surface Resistivity of Concrete’s Ability to Resist Chloride Ion Penetration." American Association of State Highway and Transportation Officials, Washington, DC.
[28] Polder, R.B., (2001). "Test methods for on-site measurement of resistivity of concrete-a RILEM TC-154 technical recommendation", Construction and Building Materials, 15, 125-131.
[29] BS 1881: part5, (1983). "Methods of testing hardened concrete for other than strength."
[30] BS 1881: part 116, (1983). "Method for Determination of Compressive Strength of Concrete Cubes."
[31] Allahverdi, A., Škvara, F., (2000). "Acidic corrosion of hydrated cement based materials part1. – mechanism of the phenomenon." Ceramics – Silikáty, 44 (3), 114-120.
[32] Daczko, J.A., Johnson, D.A., Amey, S.L., (1997). "Decreasing concrete sewer pipe degradation using admixtures." Material Performance, 36(1), 51–56.
[33] Vincke, E., Verstichel, S., Monteny, J., Verstraete, W., (1999). ″A new test procedure for biogenic sulfuric acid corrosion of concrete.″ Biodegradation, 10, 421-428.
Thank you for copying data from http://www.arastirmax.com