You are here

Home » Content

Bakır Esaslı Rodaj Disklerinin Performansı

Performance of the Copper Based Grinding Wheels

Journal Name:

  • Bilge International Journal of Science And Technology Research

Publication Year:

  • 2017

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
The present study relates to design of grinding wheels in terms of improving their performance with respect to surface quality of glasses during grinding. The performance of the copper based grinding tools was investigated on the production line in a flat glass factory. Tools were manufactured under selected sintering temperature and pressure circumstances. The grinding wheel economic service life was determined and the surface roughnesses of the samples were assessed with experimental study. Ideal microstructure conditions and grinding parameters were figured out.
Bookmark/Search this post with
Abstract (Original Language): 
Bu çalışma taşlama esnasında düz camın yüzey kalitesine bağlı olarak, taşlama disklerinin performasını arttırmak için taşlama taşı dizaynı ile ilgilidir. Bakır esaslı taşlama diskinin performansı, cam fabrikasında üretim hatlarında yapılan çalışmalarda incelenmiştir. Kullanılan taşlama diskleri belirlenen sinterleme sıcaklığında ve basınç koşullarında üretildiler. Taşlama disklerinin ekonomik servis ömürleri deneysel olarak işlenen camların yüzey kalitesine göre belirlenmiştir. Elde edilen deneysel sonuçlar ile taşlama diskinin ideal mikro yapısı ile çalışma parametreleri belirlenmiştir.
FULL TEXT (PDF): 
PDF icon arastirmax-bakir-esasli-rodaj-disklerinin-performansi.pdf
  • 1
26
31
  • English

REFERENCES

References: 

Butler, D. L., Blunt, L. A., See, B. K., Webster, J. A., & Stout, K. J. (2002). The characterisation of grinding wheels using 3D surface measurement techniques. Journal of Materials Processing Technology, 127(2), 234-237.
Dai, H., Wang, L., Zhang, J., Liu, Y., Wang, Y., Wang, L., Wan, X. (2015). Iron based partially pre-alloyed powders as matrix materials for diamond tools. Powder Metallurgy, 58(2), 83-86.
Denkena, B., Grove, T., Bremer, I., Behrens, L. (2016). Design of bronze-bonded grinding wheel properties. CIRP Annals-Manufacturing Technology, 65(1), 333-336.
Duan, D. Z., Xiao, B., Wang, W., Zhang, Z. Y., Wang, B., Han, P., Ding, X. Y. (2015). Interface characteristics and performance of pre-brazed diamond grains with Ni–Cr composite alloy. Journal of Alloys and Compounds, 644, 626-631.
Emberger, L. (1955). Sur Le Quetiens Pluviothermique. J.R. Acad. Sc. 234, 2508 –2510.
Lin, C. S., Yang, Y. L., & Lin, S. T. (2008). Performances of metal-bond diamond tools in grinding alumina. Journal of Materials Processing Technology, 201(1), 612-617.
Nitkiewicz, Z., Świerzy, M. (2006). Tin influence on diamond–metal matrix hot pressed tools for stone cutting. Journal of materials processing technology, 175(1), 306-315.
Nguyen, A. T., Butler, D. L. (2008). Correlation of grinding wheel topography and grinding performance: A study from a viewpoint of three-dimensional surface characterisation. Journal of Materials Processing Technology, 208(1), 14-23.
Ozturk, S. (2016). Grinding of flat glass with Fe-and Cu-based diamond tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 0954405416673113.
Öztürk, S. (2014). Microstructural analysis of metal-bond diamond tools in grinding of flat glass. Materialwissenschaft und Werkstofftechnik, 45(3), 187-191.
Sanayi Genel Müdürlüğü, (2014). Cam sektörü Raporu, 2014/1, Türkiye.
Smith, N. P., Smith, D. J., Pearce, T. R. A., Ashfold, M. N. R. (2003). The ductile grinding of glass using diamond fibres oriented radially in a grinding wheel.
Bilge International Journal of Science and Technology Research 2017, 1(Special Issue): 26-31
31
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 217(3), 387-396.
Sun, Y. X., Tsai, Y. T., Lin, K. H. (2015). The influence of sintering parameters on the mechanical properties of vitrified bond diamond tools. Materials & Design, 80, 89-98.
Wang, P. F., Li, Z. H., Li, J., & Zhu, Y. M. (2009). Effect of ZnO on the interfacial bonding between Na 2 O–B 2 O 3–SiO 2 vitrified bond and diamond. Solid state sciences, 11(8), 1427-1432.
Wegener, K., Hoffmeister, H. W., Karpuschewski, B., Kuster, F., Hahmann, W. C., & Rabiey, M. (2011). Conditioning and monitoring of grinding wheels. CIRP Annals-Manufacturing Technology, 60(2), 757-777.
Wu, Y., Funkenbusch, P. D. (2010).Microstructure and mechanical properties of commercial, bronze-bond, diamond-abrasive tool materials. Journal of materials science, 45(1), 251.
Tillmann, W., Gathen, M., Vogli, E., Kronholz, C. (2007). New materials and methods beckon for diamond tools. Metal Powder Report, 62(7), 43-48.
Zeren, M., Karagöz, Ş. (2007). Sintering of polycrystalline diamond cutting tools. Materials & design, 28(3), 1055-1058.
Zhao, L. L., Zhao, Q. L., Jin, G. W., Kang, X. J., Xin, X. W. (2013). Precision grinding of BK7 glasses using conditioned coarse-grained diamond wheel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(10), 1571-1577.

Thank you for copying data from http://www.arastirmax.com