[1] Rouessac, V.; Nhien, S.; Wang, J.; and Desgardin, G.; “A comparative study on the kinetics and phases formation of the (Bi,Pb)-2223 between sol-gel and solid state methods.” Physica C, 1997, 511-512.
[2] Cyril Chiang; Shei, C. Y.; Huang, Y. T.; Lee, W. H.; and Wu, P. T. “Preparation of high purity 110 K phase in the (Bi, Pb)-Sr-Ca- Cu-0 superconductor system using a solution method.” Physica C, 1990, 383-387.
[3] Akimitsu, J.; Yamazaki, A.; Sawa, H.; Fujiki, H. “Superconductivity in the Bi-Sr-Cu-O System” Jpn J Appl Phys, 1987, 26,2.12.
[4] Marconi, D.; Lung, C.; Pop, A. V. “The influence of pelletization pressure on normal and superconducting properties of (Bi,Pb):2223 bulk system.” J Alloy Compd, 2013, 355-359.
[5] Terzioglu, C.; Ozturk, O.; Kilic, A.; Gencer, A.; Belenli, I.; “Effect of cooling rates on bare bulk and silver wrapped pellets of Bi-2223 superconductor” Physica C, 2006, 153-156.
[6] Azzouz, F. B.; Mchirgui, A.; Yangui, B.; Boulesteix, C.; Salem, M. B. “Synthesis, microstructural evolution and role of substantial addition of PbO during the final processing of (Bi,Pb)-2223 Superconductors.” Physica C, 2001,83-96.
GHAFOOR, NABI and ABBASI
10
[7] Hsueh, Y. W.; Chang, S.C.; Liu, R.S.; Woodall, L.; Gerards, M. “A comparison of the properties of Bi-2223 precursor powders synthesized by various methods.” Mater Res Bull, 2001, 1653-1658.
[8] Tampieri, A.; Celotti, G.; Lesca, S.; Bezzi, G.; La Torretta, T.M.G.; Magnani, G. “Bi(Pb)-Sr-Ca-Cu-O (2223) superconductor prepared by improved sol-gel technique.” J. Euro. Ceram. Soc, 2000, 119-126.
[9] Wang, Y. L.; Bian, W.; Zhu, Y.; Fukumoto, Y.; Wiesmann, H. J.; Suenaga, M. “Fabrication of Ag-Sheated Bi-2223 Tapes Using Powders Produced by Aerosol Spray Pyrolysis.” J. Electron. Mater, 1995.
[10] Metlin, Y. G.; Tretyakov, Y. D. “Chemical routes for preparation of oxide high-temperature superconducting powders and precursors for superconductive ceramics, coatings and composites.” J. Mater. Chem., 1994, 1659-1665.
[11] Sotelo, A.; Szillat, H.; Majewski, P.; and Aldinger, F.; “Rapid synthesis of the Bi-2212 phase by a polymer matrix method.” Supercond. Sci. Technol., 1997.
[12] Garnier, V.; Monot, I.; and Desgardin, G. “Optimization of calcination conditions on the Bi-2223 kinetic formation and grain size.” Supercond. Sci. Technol., 2000, 602-611.
[13] Garnier, V.; Caillard, R.; Sotelo, A.; Desgardin, G. “Relationship among synthesis, microstructure and properties in sinter-forged Bi-2212 ceramics.” Physica C, 1999, 197-208.
[14] Garnier, V.; Caillard, R.; Desgardin, G. “(Bi–Pb)2Sr2Ca2Cu3O10+δ ceramic synthesized using a polymer matrix method.” J. Euro. Ceram. Soc., 2001, 139-142.
[15] Yamamoto, S. L. A.; Tajima, S. “Fast synthesis and single crystal growth of Pb-free and Pb-doped Bi-2223 superconductors using alkali chlorides flux technique.” Physica C, 2001, 341-344.
[16] Ozturk, O.; Yegen, D.; Yilmazlar, M.; Varilci, A.; Terzioglu, C. “The effect of cooling rates on properties of Bi1.7Pb0.35Sr1.9Ca2.1Cu3Oy superconductors produced by solid-state reaction method.” Physica C, 2007, 113-117
[17] Bilgili, O.; Selamet, Y.; Kocabas, K. “Effects of Li Substitution in Bi-2223 Superconductors.” J. Supercond. Nov. Magn., 2008, 439-449.
[18] Hamadneh, I.; Agil, A.; Yahya, A.K.; Halim, S.A. “Superconducting properties of bulk Bi1.6Pb0.4Sr2Ca2− xCdxCu3O10 system prepared via conventional solid state and coprecipitation methods.” Physica C, 2007, 207-210.
[19] Kameli, P.; Salamati, H.; Eslami, M. “The effect of sintering temperature on the intergranular properties of Bi2223 superconductors.” Solid State Commun., 2006, 30-35.
[20] Jiang, J.; Abell, J. S.; “Effects of precursor powder calcination on critical current density and microstructure of Bi-2223/Ag tapes.” Supercond. Sci. Technol.,1997.
[21] Grivel, J. C.; Jeremie, A.; Hensel, B.; Flükiger, R. “Effects of Pb in the First Stages of the Bi(2223) Phase Formation.” Supercond. Sci. Technol., 1993.
[22] Azam, M.; Haider, A.; Jamil, Y.; Amin, N. “Effect of Heat Treatment on the Properties of High Tc B-Based Superconductors” Pak. J. Agri. Sci., 2009.
Effects of change in concentration of lead on the properties of Bi-2223
11
[23] Gul, I.H.; Rehman, M. A.; Maqsood, A. “Temperature Dependence of Thermal and Electrical Conductivity of Bi-Based High-Tc (2 2 2 3) Superconductor.” Physica C, 2006, 83-87.
[24] Horvat, J.; Guo, Y. C.; Zeimetz, B.; Liu, H. K.; Dou, S. X. “Improvement of grain connectivity in Bi2223/Ag tapes by reducing Bi2201 phase at grain boundaries.” Physics C, 1998, 43-48.
[25] Gurevich, A.; Pashitskii, E. A. “Current transport through low-angle grain boundaries in high-temperature superconductors.” Phys. Rev. B: Condens. Matter., 1998.
[26] Müller, J.; Eibl, O.; Fischer, B.; Herzog, P. “Bi(Pb)-2223 phase formation in Ag-sheathed tapes: the role of oxygen partial pressure during sintering.” Supercond. Sci. Technol., 1998.
[27] Haldar, P.; Hoehn Jr, J. G.; Rice, J. A.; Motowidlo, L. R. “Enhancement in critical current density of Bi‐Pb‐Sr‐Ca‐Cu‐O tapes by thermomechanical processing: Cold rolling versus uniaxial pressing.” Appl. Phys. Lett., 1992.
[28] Mohammed, N. H.; Awad, R.; Abou-Aly, A. I.; Ibrahim, I. H.; Hassan, M. S.”Optimizing the Preparation Conditions of Bi-2223 Superconducting Phase using PbO and PbO2” MSA, 2012, Vol. 3 No. 4, 224-233.
[29] Yoshida, H.; Kaneko, T.; Abe, S.; Miura, S.; Nakajima, S.; Atou, T.; Kikuchi, M.; Syono, Y. “Pressure Effect on the Superconducting Transition Temperature of T1-Based High-Tc Superconductor (2212).” Advances in Superconductivity III, 1991.
[30] Dorris, S.E.; Prorok, B.C.; Lanagan, M.T.; Browning, N.B.; Hagen, M.R. “Methods of introducing lead into bismuth-2223 and their effects on phase development and superconducting properties.” Physica C, 1994, 163-172.
Thank you for copying data from http://www.arastirmax.com
