Buradasınız

DİŞ RENGİNDEKİ RESTORATİF MATERYALLERDE FARKLI CİLA TEKNİKLERİNİN YÜZEY ÖZELLİKLERİNE ETKİLERİ

EFFECT OF POLISHING PROCEDURES ON SURFACE CHARACTERISTICS OF TOOTH-COLORED RESTORATIVES

Journal Name:

Publication Year:

Abstract (2. Language): 
The purpose of this study was to evaluate the effects of polishing procedures on the roughness of tooth-colored restorative materials. 80 discs (10 mm x 2 mm) were fabricated by using Prodigy (Kerr), Vitremer (3M), Dyract (Dentsply, DeTrey) and Ketac-Silver (ESPE). The surfaces of the samples were prepared as follows: Group 1, polished with 16- blade tungsten carbide bur (Comet); Group 2, polished with abrasive discs (Hawe-Neos); Group 3, application of different bonding agents and a varnish [ Ketac-Silver / Varnish (ESPE) , Vitremer / Finishing Gloss (3M), Dyract / Prime&Bond 2.1 (Dentsply, DeTrey) , Prodigy / OptiGuard (Kerr) J. Surfaces of materials cured against a Mylar strip were used as the control group. The specimens were stored in distilled water at 37° C for a week prior to surface roughness (Ra) evaluation, which was carried out by using Surftest.402 Analyzer (Mitutoyo). Data were subjected to one-way ANOVA and Kruskal-Wallis test. The control groups of Prodigy (0.06 ± 0.01 Ra) and Ketac-Silver (0.08 ± 0.02 Ra) demonstrated the lowest Ra values when compared to all other groups (p < 0.05). For Vitremer, significantly smoother surfaces (0.17± 0.03 Ra) were obtained in group 3 (p < 0.05). No statistically significant difference in surface roughness was detected between the polishing procedures both in Dyract and Prodigy.
Abstract (Original Language): 
Bu çalışmada, diş rengindeki restoratif materyallerde, farklı cila işlemleri sonrasında yüzey pürüzlülükleri karşılaştırmalı olarak değerlendirilmiştir. Cam iyonomer simam (Ketac-Silver, ESPE), reçine ile modifıye edilmiş cam iyonomer (Vitremer, 3M), poliasit ile modifıye edilmiş kompozit reçine (Dyract, Dentsply, DeTrey) ve hibrid kompozit reçine (Prodigy, Kerr) ile 10 mm çapında ve 2 mm kalınlığında 80 adet disk hazırlanmıştır. Selüloid bant altında elde edilen yüzeyler kontrol grubu olarak ayrılırken, diğer yüzeyler 1. Grupta 16 bıçaklı tungsten karbit frezle, 2.Grupta abrasif disklerle (Hawe-Neos) cilalanmıştır. 3. Grupta ise Ketac-Silver yüzeyine vernik, Vitremer yüzeyine Finishing Gloss, Dyract yüzeyine Prime&Bond 2.1 ve Prodigy yüzeyine OptiGuard uygulanmıştır. 37° C'deki distile suda 1 hafta bekletilen örneklerin yüzey pürüzlülükleri Surftest 402 Analyzer ile ölçülmüştür. Veriler tek yönlü ANOVA ve Kruskall- Wallis testleri ile istatistiksel olarak değerlendirilmiştir. En pürüzsüz yüzeyler Prodigy (0.06 ± 0.01 Ra) ve Ketac-Silver'da (0.08 ± 0.02 Ra) şeffaf bant altında elde edilmiştir. Vwemer de ise bonding uygulanan grup (0.17± 0.03 Ra) diğer cila tekniklerine göre anlamlı derecede .pürüzsüz bir yüzey göstermiştir (p < 0.05). Dyract ve Prodigy 'de cila teknikleri arasında anlamlı bir farka rastlanmamıştır.
45
54

REFERENCES

References: 

1- Baum L, Phillips RW, Lund MR's Textbook of operative dentistry. 3rd. cd. Philedelphia: WB Saunders, 1995: 265.
2- Chan KC, Fuller JL Hormati AA. The ability of foods to stain two composites. JProsthet Dent 1980: 43: 542-5.
3- Chen RC, Chan DC, Chan KC. A quantitative study of finishing and polishing techniques for a composite. J Prosthet Dent 1988: 59 292-7.
4- Dennison JB, Fau PL, Powers JM. Surface roughness of microfilled composites. J Am Dent Assoc 1981: 102: 859-62.
5- Dunkin RT, Chambers DW. Gingival response to class V composite resin restorations. J Am Dent Assoc 1983: 106. 482-4.
6- Eakle WS. Fracture resistance of teeth restored with class II bonded composite resin- J Dent Res 1986: 65: 149-53.
7- Fusayama T, Kohno A. Marginal closure of composite restorations with the gingival wall in cementum/ dentin. J Prosthet Dent 1989: 61: 293-6.
8- Hergott AML, Ziemiecki TL, Dennison JB. An evaluation of different composite resin systems finished with various abrasives. / Am Dent Assoc 1989: 119: 729-32.
DİŞ RENGİNDEKİ RESTORATİF MATERYALLERDE FARKLİ CİLA TEKNİKLERİNİN 53 YÜZEY ÖZELLİKLERİNE ETKİLERİ
9- Hoelscher DC, Neme AML, Pink FE, Hughes PJ. The effect of three finishing systems on four esthetic restorative materials. Oper Dent 1998: 23: 36-42.
10- Hondrum SO, Fernandez R. Contouring, finishing and polishing class 5 restorative materials. Oper Dent 1997: 22: 30-6.
11- Lutz F, Setcos JC, Phillips RW. New finishing instruments for composite resins. J Am Dent Assoc 1983: 107: 575-80.
12- Mc Lean JW. Clinical applications of glass-ionomer cements. Oper Dent 1992: supp.5: 184-90.
13- Prarten DH, Johnson GH. An evaluation of finishing instruments for an anterior and a posterior composite resin. J Prosthet Dent 1988: 60: 154¬8.
14- St Germain Jr HA, Meiers JC. Surface roughness of light-activated glass-ionomer cement restorative materials after finishing. Oper Dent 1996:2/: 103-9.
15- Stoddard JW, Johnson GH. An evaluation of polishing agents for composite resins. J Prosthet Dent 1991: 65: 491-5.
16- Sturdevant CM, Robertson TM, Heymann HO, Sturdcvant JR's The art and science of operative dentistry. 3rd. ed. St. Louis: Mosby Yearbook, 1995: 584.
17- Tate WH, Powers JM. Surface roughness of composites and hybrid ionomers. Oper Dent 1996: 21: 53-8.
18- Van Meerbeek B, Perdigao J, Lambrcchts P, Vanherle G. The clinical performances of adhesives. J Dent 1998: 26: 1-20.
19- Weitman RT, Eames WB. Plaque accumulation on composite surfaces after various finishing procedures. J Am Dent Assoc 1975: 91: 101-6.
20- Willershausen B, Callaway A, Emst CP, Slender E. Does varnish protect various dental materials from damage by oral bacteria?. J Dent Res 1997: 5: abs. no; 413: 1146.
21- Woolford MJ. Finishing glass polyalkcnoate (glass-ionomer) cements. Br Dent J 1988: 165: 395-99.
54
CAN DORTER,
YAVU
Z GÖMEÇ, BEGÜM GÜRAY EFES, ESRA YILDIZ
22- Yap AUJ, Lye KW. Surface characteristics of tooth-colored restoratives polished utilizing different polishing systems. Oper Dent 1997: 22: 260-5.
Yazışma Adresi : Dr. Can Dörter
Istanbul
Üniversites
i Dişhekimliği Fakültesi Konservatif Diş Tedavisi BD 34390, Çapa - İSTANBUL

Thank you for copying data from http://www.arastirmax.com