You are here

Home » Content

ANOT METALİ BUHARLARINDA PLAZMA ÜRETEN YENİ TEKNİK, TERMİYONİK VAKUM ARK (TVA)

THE THERMIONIC VACUUM ARC (TVA) - A NEW TECHNIQUE PRODUCING PLASMA IN THE VAPORS OF THE ANODE METAL

Journal Name:

  • Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi

Publication Year:

  • 2006

Key Words:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
The thermionic vacuum arc (TVA) is a new type of a plasma source which generates a pure metal vapor plasma. In this study, basic construction of this new type of a plasma source installed at Osmangazi University, Physics Department in 2000 and the charactristics of the TVA discharge are presented.
Bookmark/Search this post with
Abstract (Original Language): 
Termiyonik vakum ark (TVA), saf metal buharı plazması üreten yeni tip bir plazma kaynağıdır. Bu çalışmada 2000 yılında Osmangazi Üniversitesi, Fizik bölümü’nde kurulan bu yeni tip plazma kaynağının temel yapısı ve TVA deşarjın karakteristikleri verilmiştir.
FULL TEXT (PDF): 
PDF icon arastirmax-anot-metali-buharlarinda-plazma-ureten-yeni-teknik-termiyonik-vakum-ark-tva.pdf
  • 3
109-118
  • Turkish

REFERENCES

References: 

Akan T., Ekem N., Musa G. (2002): “Bakır Buharlarında Termiyonik Vakum Ark (TVA)
Deşarjın Akım Voltaj Karakteristiğinin İncelenmesi”, 21.TFD Kongresi, Süleyman
Demirel Üniversitesi.
Akan T., Ekem N., Musa G. (2002): “Bakır Buharlarında Termiyonik Vakum Ark (TVA)
Deşarjın Breakdown Voltajının İncelenmesi”, 21.TFD Kongresi, Süleyman Demirel
Üniversitesi.
Dorodnov A.M., Kuznetsov A.N., Petrosov V.A. (1979): “New Anode Vapor Vacuum Arc
with A Permanent Hollow Cathode”, Sov. Phys.-Tech. Phys. Lett. Vol. 5, p. 418.
Ehrich H. (1988): “The Anodic Vacuum Arc. I. Basic Construction And Phenomenology”,
J.Vac.Sci.Technol., A 6(1), p. 134.
Hamilton H.D. (1967): French Patent No. 1496697.
Lafferty J.M. (1980): “Vacuum Arcs.Theory and Application”, Wiley, NewYork.
Musa G. (1992): “Discharges In Metal Vapors”, Romanian Reports In Physics, vol. 44, no. 9-
10, p. 917.
Musa G., Baltog A., Popescu A., Betiu N., Mustata I. (1986): “Electrical and Spectral
Characteristics Of A Heated Cathode Discharge In Metal Vapors”, Contrib. Plasma Phys.
Vol.26, p.171
Musa, G., Betiu, N., Mustata, I., Baltog, A. ve Popescu, A. (1984): “Heated Cathode Arc In
Vacuum Developed In The Vapors Of The Heated Anode”, Proc. Xıth Int. Symp. On
Discharges And Insulation In Vacuum, Berlin, p. 229 (Unpublished).
Musa G., Ehrich H., Mausbach M. (1994): “Studies On Thermionic Cathode Anodic
Vacuum Arcs”, J.Vac.Sci.Technol., A12(5), p. 2887.
Musa G., Ehrich H., Schuhmann S. (1997): “Pure Metal Vapor Plasma Source with
Controlled Energy of Ions”, IEEE Trans. On Plasma Science, Vol. 25, no.2, p. 386.
Raizer, Y.P. (1991): “Gas Discharge Physics”, Springer-Verlag.Berlin.
Randhawa H. (1988): “Cathodic Arc Plasma Deposition Technology”, Thin Solid Films,
vol. 16, p. 175.
Sayenko V.A., Koloniets N.F., Mashtaliv N.N. (1983): Proceedings Of The 16th ICPIG,
Düsseldorf (Unpublished).
Snaper A.A. (1971): U.S. Patent No. 3625848.

Thank you for copying data from http://www.arastirmax.com