THE EFFECTS OF THAWING TIME, POST-THAWED THERMAL APPLICATIONS AND RESISTANCE TEST ON SEMEN CHARACTERISTICS IN BULLS
Journal Name:
- İstanbul Üniversitesi Veteriner Fakültesi Dergisi
Keywords (Original Language):
Author Name | University of Author | Faculty of Author |
---|---|---|
Abstract (2. Language):
The aim of the present study was to demonstrate the relationship between short- and long-thawing procedures and post-thawing thermal conditions. Semen samples of 4 Holstein bulls, frozen in straws
of 0.25 ml, were used. Straws were thawed in water baths at 37°C using two different thawing techniques, the
12- (Group A) and 30-second (Group B) thawing, and 6 subgroups (A1-A6 / B1-B6) were established for each
technique. Semen samples of the first subgroup were used as control, which were subjected to spermatological
tests without any post-thawing processes. Those in the second group were kept in 2±1°C water bath for 300
seconds after thawing. Following the thawing, samples in the third and the fourth groups were kept at 5°C for
45 and 150 seconds, respectively. Samples in the fifth and the sixth groups were also kept at 20°C for 45 and
150 seconds, respectively. Spermatological evaluations(motility, acrosomal and membrane integrity) were
carried out after the applications. Then, in order to perform resistance test, the semen samples were diluted
with modified buffered hepes and incubated at 37°C for 2 hours. Following the incubation, motility and
acrosomal integrity were re-evaluated.
No significant difference was observed between two different thawing techniques, with respect to all
criteria, prior to and after the incubation. The only exception was found in the motility in groups A5 and B5
kept at 20°C for 45 second post-incubation. When thawed semen is kept under the mentioned thermal
conditions; sperm motility at 12-second technique (A5) ishigher than the 30-second technique (B5, P < 0.01).
Following the incubation, repetition of routine tests used to determine the potential fertility may be
useful. Special attention should be paid in performing the artificial insemination immediately after the
thawing, especially at seasonal temperatures below 20°C. The shorter technique of thawing in 12 seconds can
be easily used especially at 20°C and lower temperatures
Bookmark/Search this post with
Abstract (Original Language):
Sunulan çalışmada, kısa ve uzun süreli eritme teknikleri ile erime sonrasıuygulanan ısı
değişiklikleri arasındaki ilişkinin ortaya konmasıamaçlandı. Çalışmada siyah alaca ırkı4 başboğaya ait 0.25
ml.’lik payetlerde dondurulmuşsperma örnekleri kullanıldı. Payetler 37°C su banyosunda 12 ve 30 saniyelik
sürelerle eritilerek 2 ayrıeritme tekniği (A ve B grupları) ve her bir teknik için 6 alt grup oluşturuldu. Alt
gruplardan birinci gruptaki spermalar kontrol grubunu oluşturdu ve eritme sonrasıhiç bir işlem yapılmaksızın
spermatolojik testler uygulandı. İkinci gruptakiler eritme sonrası2±1°C su banyosunda 300 saniye tutuldu.
Üçüncü ve dördüncü gruplardaki örnekler eritmeyi takiben sırasıyla 45 ve 150 saniye sürelerle 5°C çevre ısına
maruz bırakıldı. Beşinci ve altıncıgruplardakiler ise eritmenin ardından 20°C çevre ısısına sırasıyla 45 ve 150
saniye süreyle bırakıldı. Spermatolojik incelemeler (motilite, akrozomal ve membran bütünlüğü), yukarıdaki
ısıuygulamalarınıtakiben gerçekleştirildi. Sonra sperma örnekleri, tamponlanmışmodifiye hepes ile
sulandırılarak 37°C’deki etüvde 2 saat inkübe edildi. İnkübasyonu takiben motilite ve akrozomal bütünlük
incelemeleri tekrarlandı.
İnkübasyon öncesi ve sonrasındaki veriler incelendiğinde, motilite, membran bütünlüğü ve
morfolojik anomalilerde her iki eritme tekniğinde de farklılık bulunmamıştır. Tek fark inkübasyon sonrasında
20°C’de 45 saniye bekletilen A5 ve B5 eritme gruplarıarasında, motilite değerlerinde tespit edilmiştir. Eritme sonrasıbelirtilen koşullar altında, 12 saniyelik eritme sonrası(A5) sperma motilitesi, 30 saniyelik (B5)
eritmeye kıyasla önemli derecede daha yüksek bulunmuştur (P<0.01).
Potansiyel fertilitenin belirlenmesinde kullanılan rutin testlerin inkübasyon sonrasında tekrarlanması
yararlıolabilir. Eritme işleminin tamamlanmasından sonra tohumlama mümkün olduğu kadar kısa sürede
gerçekleştirilmeli ve bu süreye 20°C’nin altındaki çevre ısılarında daha da dikkat edilmelidir. Daha kısa teknik
olan 12 saniyede eritme, özellikle hava sıcaklığının 20°C ve daha altında olduğu günlerde rahatlıkla
kullanılabilir.
FULL TEXT (PDF):
- 2
12-22