Buradasınız

BİR DIESEL MOTORUNDA SIKIŞTIRMA ORANI ARTIŞININ PERFORMANSA ETKİSİ

THE EFFECTS OF INCREASE THE COMPRESSION RATIO ON PERFORMANCE OF A DIESEL ENGINE

Journal Name:

Publication Year:

Keywords (Original Language):

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
An optimisation of the Diesel cycle has been performed for power output and thermal efficiency with respect to compression ratio for various extreme temperature ratio. The relation between compression ratio and extreme temperature ratio, which gives optimum performance is derived. As the compression ratio of the diesel engine is increased in comparison to the optimum value of the engine, it is shown that the performance of the engine is decreased. The experimental study agrees with these results. In this study, compression ratio of a single cylinder pre-combustion chamber variable compression ratio Ricardo E6 type engine with the optimum compression ratio of 18.20 was increased to 19.60. As a results of this increase, specific fuel consumption was increased about 8 % and brake thermal efficiency was decreased about 7.5 %.
Abstract (Original Language): 
Bu çalışmada farklı ekstrem sıcaklık oranlarında, sıkıştırma oranı değişiminin bir Diesel motorunun güç ve verimi üzerine etkisini araştırmak amacıyla teorik Diesel çevrim analizi gerçekleştirilmiştir. Optimum sıkıştırma oranını veren bağıntı çıkarılmıştır. Teorik Diesel çevrim analizi, sıkıştırma oranı sürekli arttırıldığında optimum noktadan itibaren motor performansında düşmenin olduğunu göstermektedir. Deneysel çalışmada, ön yanma odalı tek silindirli sıkıştırma oranı değiştirilebilir Ricardo E6 tipi bir Diesel motorunda sıkıştırma oranı 18.20'den 19.60'a çıkarıldığında özgül yakıt sarfiyatının % 8'e varan oranda arttığı, efektif verimin ise % 7.5'e varan oranda azaldığı tespit edilmiştir.
171
177

REFERENCES

References: 

Bhattacharyya, S.
2000
. Optimizing an Irreversible Diesel Cycle-fine Tuning of Compression Ratio and Cut-off Ratio. Vol. 40, p. 847-854.
Borat, O., Sürmen A., Balcı, M. 1995. İçten Yanmalı Motorlar. Cilt I, G. Ü. Teknik Eğitim Fakültesi Matbaası.
Junxing,
L.
, Lingen, C., Chih W. and Fengriu S. 1999. Finite-Time Thermodynamic Performance of a Dual Cycle. International Journal of Energy
Research. Vol. 23, p. 765-772.
Öztürk A., Kılıç A. 1993. Çözümlü Problemlerle Termodinamik, III. Baskı, Çağlayan Yayınevi, İstanbul.
Parlak, A., Yaşar H. and Kusoglu, A. 2001. An Experimenal study on NOx Emission of a Lower Compression Ratio LHR IDI Diesel Engine. IV. International Thermal Energy Congress. Cesme-Turkey.
Parlak A., Yaşar, H. 2001. Yanma Sıcaklığı-Sıkıştırma Oranı İlişkisinin Motor Performansına Etkisi Üzerine Teorik Dizel Çevrim Analizi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü Dergisi, Cilt: 14, Sayı: 4.
Parlak, A., Yasar, H. and Sahin, B. 2002.
Performance and Exhaust Emission Characteristics of a Lower Compression Ratio LHR Diesel Engine, Nergy Conversion & Management Volume : 44, Issue: 1, Page : 163-174, 2003.
Mühendislik Bilimleri Dergisi 2003 9 (2) 171-177
176
Journal
of Engineering Sciences 2003 9 (2) 171-177
Bir Diesel Motorunda Sıkıştırma Oranı Artışının Performansa Etkisi, A. Parlak
Safgönül B. 1981. Pistonlu Motorlar Cilt I, Teknik Üniversite Yayınları, İstanbul.
Stone, R. 1989. Motor Vehicle Fuel Economy. Macmilan Education Ltd., London, UK. Printed in Hong Kong.
Takeuchi, K., Kuboba,M., Konagai, M., Watanabe
and Kihara, R. 1985. The New Isuzu 2.5 lt.
4-Cylinder Direct Injection Diesel Engine, SAE
850261.
Wang, W., Chen, L., Sun, F. and Wu, C. 2002. The
Effect of Friction on the Performance of an Air Standart Dual Cycle, Journal 2, p. 340-344.

Thank you for copying data from http://www.arastirmax.com