Buradasınız

FARKLI YÜZEY İŞLEMLERİNÎN PORSELEN RESTORASYÖNLARIN OPTÎK ÖZELLİKLERÎNE ETKÎSİ

Effect of Different Surface Treatments on Optical Properties of Porcelain Restorations

Journal Name:

Publication Year:

Keywords (Original Language):

Abstract (2. Language): 
Purpose: The purpose of the study was to evaluate the effect of different porcelain surface treatments on optical properties of different porcelain systems. Material and methods: Totally 240 metal-based porcelains were made by 3 different porcelain systems with different thicknesses. Different surface treatments as natural glaze (N), glaze (G), porcelain polish (L), porcelain diamond paste (EP), porcelain polish and diamond paste (L)+(EP) were applied on porcelain surfaces. Color values (L*,a*,b*) were determined with a color measurement device. Statistical analyses were performed with ANOVA and Tukey HSD, and Paired Sample t-test (P<0.05). Results: Glaze, porcelain polish, porcelain diamond paste or porcelain polisher and diamond paste; that applied on porcelain surfaces affected the optical properties of porcelains but there were no significant differences were found between them. After surface treatments as the L* value increased, there were no significant differences between a* and b* values. Lightness of low fusing porcelain increased more, when compared with feldspatic porcelains. Conclusion: After porcelain surface treatments color changes was found as clinically imperceptible.
Abstract (Original Language): 
Amaç: Çalışmanın amacı porselen yüzeyine uygulanan farklı bitirme tekniklerinin, farklı porselen sistemlerin optik özelliklerine etkisini değerlendirmektir. Gereç ve Yöntem: 3 farklı porselen sisteminden farklı kalınlıklarda toplam 240 adet metal destekli porselenler yapıldı. Örneklere natural glazür (N), glazür (G), porselen lastiği (L), porselen elmas patı (EP), porselen lastiği ve elmas pat (L)+(EP) yüzey işlemleri uygulandı. Örneklerin renk değerleri (L*,a*,b*) renk ölçüm cihazıyla belirlendi. İstatistiksel analizler ANOVA ve Tukey HSD, eşleştirilmiş iki grup t-test ile yapıldı (P<0.05). Bulgular: Porselen yüzeylerine glazür, seramik lastiği, elmas patı veya lastik ile birlikte elmas patı uygulama, porselenin optik özelliklerinde farklılıklar oluşturdu ancak birbiri aralarında anlamlı fark bulunamadı (P>0.05). Yüzey işlemleri sonrasında tüm porselen yüzeylerin L* değeri artarken, a* ve b* değerleri arasında anlamlı değişiklik bulanamadı. Düşük ısı porseleninin parlaklığı tüm yüzey işlemleri sonrasında, geleneksel porselenlere göre daha fazla arttı. Sonuç: Yüzey bitirme işlemleri sonrası porselen restorasyonlarda oluşan renk değişimi klinik olarak kabul edilebilir düzeydedir.
1
8

REFERENCES

References: 

1. Rasetto FH, Driscoll CF, von
Fraun¬hofer
JA.
Effec
t of light source and time on the polymerization of resin cement through ceramic veneers. J Prosthodont, 2001; 10: 133-39.
2.
Fische
r H, Maier HR, Marx R. Impro¬ved reliability of leucite reinforced glass by ion-exchange. Dent Mater, 2000; 16: 120-28.
3.
Fische
r H, Marx R. Improvement of strength parameters of a leucite- reinforced glass ceramic by dual-ion ex-change. J Dent Res, 2001; 80: 336-39.
4.
Akso
y G, Polat H, Polat M, Coskun G. Effect of various treatment and glazing (coating) techniques on the rough-ness and wettability of ceramic dental restorative surfac-es. Colloids Surf B Biointerfaces,
2006; 53: 254-59.
5.
Cook
, PA, Griswold HW, Post AC. The effect of superfi-cial colorant and glaze on the surface texture of vacuum-fired porcelain. J Prosthet Dent, 1984; 51: 476-84.
6.
M
c Lean JW. The science and art of dental ceramics. A col-lection of monographs. Louisiana State University. School of Dentistry, Continuing Education Prog-ramme,1974.
7.
Al-Wahadn
i A, Martin DM. Glazing and finishing dental por-celain: a literature review. J Can Dent Assoc, 1998; 64: 580-83.
8. Wright MD, Masri R, BDS, Driscoll
CF, Romberg E, Thompson GA, Runyan DA. Comparison of three systems for the polis¬hing of an ultra-low fusing dental porcelain. J Prosthet Dent, 2004; 92: 486-90.
8
Farklı yüzey işlemlerinin porselen restorasyonların optik özelliklerine etkisi
9. Sulik
WD
, Plekavich EJ. Surface finishing of dental porcelain. J Prosthet Dent, 1981; 46: 217-21.
10. Raimondo RL Jr, Richardson JT, Wi¬edner B. Polished versus autoglazed dental porcelain. J Prosthet Dent, 1990; 64: 553-57.
11. Hekimoğlu
C
, Anıl N, Etikan Î . Effect of accelerated aging on the color stability of cemented laminate veneers. Int J Prostho-
dont, 2000; 13: 29-33.
12.
Jefferie
s SR. The art and science of abrasive finishing and polishing in restorative dentistry. Dent Clin North Am, 1998;
42(4): 613-27.
13. Evrim D, Zaimoğlu A. Temel metal ve kor alt yapı üzerine farklı kalınlıklarda hazırlanan düşük ısı porselenin renk stabili-tesinin eskitme sonrası karşılaştırılması. AÜ Diş Hek Fak Derg, 2006; 33(1): 107-18.
14. Çömlekoğlu ME, Sağırkaya E., Ala-dağ A., Güngör A., Çal E., Mamadzade S. Farklı yüzey bitirme işlemlerinin tüm seramik restorasyonların renk stabilitesi üzerine etkisi. SÜ Diş Hek Fak Derg, 2010;
19: 15-21.
15. Wright MD, Masri R, BDS, Driscoll CF, Romberg E, Thompson GA, Runyan DA. Comparison of three systems for the polis¬hing of an ultra-low fusing dental porcelain.
J Prosthet Dent, 2004; 92: 486-90.
16. Bağış B., Gürbüz A., Öztaş D., Usta-ömer S. Porselen yüzeylerde farklı bitirme teknikleinin değerlendirilmesi. AÜ Diş Hek Fak Derg, 2007; 34(1): 25-31.
17.
O'Brie
n WJ. Dental materials and their selection. Chapter 3: Color and appearance. 2nd ed., Chicago: Quintessence
Publishing, 1997.
18.
Scurri
a MS., Powers JM. Surface ro¬ughness of two polished ceramic materials. J Prosthet Dent, 1997; 71: 174-77.
19.
Al-Wahadn
i A. An invitro investigation into the surface roughness of two glazed,
unglazed and refinished ceramic materials. Quintessence Int, 2006; 37: 311-17.
20. Saraç D,
Tur
k T, Elekdağ TS, Saraç YS. Comparison of three polishing techniques fort wo all ceramic materials. Int J
Prosthodont, 2007; 20: 462-68.
21.
Dougla
s RD. Color stability of new-generation indirect resins for prosthodon-tic application. J Prosthet Dent, 2000; 83:
166-70.
22.
Johnsto
n WH, Kao EC. Assessment of appearance match by visual observa-tion and clinical colorimetry. J Dent Res, 1989; 68: 819-22.
23.
Ruyte
r IE, Nilner K, Moller B. Color stability of dental composite resin materials for crown and bridge veneers. Dent Mater, 1987; 3: 246-51.
24.
Squivel-Upsha
w JF, Chai J, Sansano S, Shonberg D. Re-sistance to staining, fle-xural strength, and chemical solu-bility of core porcelains for all ceramic crowns. Int
J Prosthodont, 2001; 14: 284-88.

Thank you for copying data from http://www.arastirmax.com